Windows Update Errors 0x80070643 & 0x80070070

[Levick42]

Hi,

The above two error codes are coming up in event viewer after failed updates, this is happening across 2 different Virtual Machines and 2 PCs.
There are various different updates that this is happening on and there doesn't seem to be any consistency across the board on much.

Please see the below SFCFix Logs and CBS Logfiles, any help would be greatly appreciated!

SFCFix Log CBS Logfiles

Thanks in advance
Amy

 

[Sysnative Windows Update]

Hello and welcome! I'll be with you tonight!

 

[Levick42]

Thanks! I don't think my link above is pointing to the correct thing for the CBS Logfiles so please try here: CBS Logfiles

 

[Sysnative Windows Update]

Please attempt the updates again and attach CBS.log I'm not seeing anything to go on in the provided logs.

 

[Levick42]

Thanks, I will run again and post the results.
Or though thinking about it, every time the updates fail the PC will revert, will that effect the CBS Logs?

Amy

 

[Sysnative Windows Update]

So updates fail upon reboot/configuration?

 

[Levick42]

Correct, the updates all appear to install and then as soon as your restart to finish them, the PC will boot loop until it finally reverts changes.
Apologies for my poor explanation in the starting post! It was the end of a long day and I am starting to pull my hair out with this one.

Thanks in advance!!
Amy

 

[Sysnative Windows Update]

That's really helpful, at what percentage approximately do they revert?

 

[Levick42]

Aprox 30-40%, the machine will then boot loop until it reverts.

Thanks

 

[Sysnative Windows Update]

OK, attach C:\Windows\Inf\setupapi.dev.log please.

 

[Levick42]

Thanks

Click Here

 

[Sysnative Windows Update]

Wrong link...

 

[Levick42]

:banghead:

Click here

 

[Sysnative Windows Update]

FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

 

[Levick42]

Should I run 64bit even though its a 32bit machine?

 

[Sysnative Windows Update]

Nope, if it's 32-Bit, then you need to run 32 Bit version of the tool.

 

[Levick42]

Fix result of Farbar Recovery Scan Tool (x86) Version: 06.06.2018 01
Ran by KongK (13-06-2018 19:34:16) Run:1
Running from C:\Users\kongk\Desktop
Loaded Profiles: KongK (Available Profiles: ITSupport & block & SophosUser & KongK)
Boot Mode: Normal


==============================================


fixlist content:
*****************
DeleteValue:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network|Config




*****************


"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\\Config" => removed successfully.


==== End of Fixlog 19:34:16 ====

 

[Sysnative Windows Update]

Please reboot your machine and then try updates.

 

[Levick42]

Same again I'm afraid.

 

[Sysnative Windows Update]

Attach CBS.log and setupapi.dev.log again.