Windows DISM, SFC all not working - Pls Need help

Coolnetworks · Oct 28, 2022

First time posting here and after a driver update I'm having trouble booting my system. I loaded Hirens boot disk and ran some Commands.
I tried to sfc/SCANNOW but it always says "Windows Resource Protection could not start the repair service."

Tried DISM.exe /Online /Cleanup-image /Restorehealth but it says "Error: 126" "The specified module could not be found."

Windows 10 Home 2021

Coolnetworks · Oct 28, 2022

Here are the files requested:

When I run an offline DISM scan it prints:

C:\>Dism /image:c:\ /cleanup-image /restorehealth /source:E:\install.wim

Deployment Image Servicing and Management tool
Version: 10.0.19041.1

Image Version: 10.0.19041.1466

Error: 0x800f0801

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at X:\windows\Logs\DISM\dism.log

x BlueRobot · Oct 31, 2022

Rich (BB code):

2022-10-16 08:37:52, Info                  CSI    00001228 BFSVC: 'ServiceBootFiles MuiOnly:n Res:n Fonts:n BootMgrOvw:n BootStatOvw:n DbgTrn:y SuspendBDE:n'

2022-10-16 08:37:52, Info                  CSI    00001229 BFSVC: 'Failed to get partition name. Status = 0xc0000452'

2022-10-16 08:37:52, Info                  CSI    0000122a BFSVC: 'Failed to get system partition! Last Error = 0x3bc3'

2022-10-16 08:37:52, Info                  CSI    0000122b BFSVC: 'ServicingBootFiles failed. Error = 0x3bc3'

2022-10-16 08:37:52, Error                 CSI    0000122c@2022/10/16:13:37:52.864 (F) onecore\base\wcp\plugins\bfsvcai\bfsvcai.cpp(485): Error HRESULT_FROM_WIN32(298) originated in function Windows::WCP::WCF::BfsvcInstaller::CommitChanges expression: Result
[gle=0x80004005]
2022-10-16 08:37:52, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2022-10-16 08:37:52, Info                  CBS    Could not get file name for current session file logging [HRESULT = 0x80004003 - E_POINTER]

Could you please open an elevated command prompt and enter the following commands:

Rich (BB code):

diskpart
list disk
select disk #
list partition

Please replace # with the number of your disk where Windows is installed.

Coolnetworks · Oct 31, 2022

Thanks for your reply. I was working with a tech to rebuilt the boot and recovery partitions but the Windows part still seems defective.

Coolnetworks · Oct 31, 2022

x BlueRobot said:

Rich (BB code):

2022-10-16 08:37:52, Info                  CSI    00001228 BFSVC: 'ServiceBootFiles MuiOnly:n Res:n Fonts:n BootMgrOvw:n BootStatOvw:n DbgTrn:y SuspendBDE:n'

2022-10-16 08:37:52, Info                  CSI    00001229 BFSVC: 'Failed to get partition name. Status = 0xc0000452'

2022-10-16 08:37:52, Info                  CSI    0000122a BFSVC: 'Failed to get system partition! Last Error = 0x3bc3'

2022-10-16 08:37:52, Info                  CSI    0000122b BFSVC: 'ServicingBootFiles failed. Error = 0x3bc3'

2022-10-16 08:37:52, Error                 CSI    0000122c@2022/10/16:13:37:52.864 (F) onecore\base\wcp\plugins\bfsvcai\bfsvcai.cpp(485): Error HRESULT_FROM_WIN32(298) originated in function Windows::WCP::WCF::BfsvcInstaller::CommitChanges expression: Result
[gle=0x80004005]
2022-10-16 08:37:52, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2022-10-16 08:37:52, Info                  CBS    Could not get file name for current session file logging [HRESULT = 0x80004003 - E_POINTER]

Could you please open an elevated command prompt and enter the following commands:

Rich (BB code):

diskpart
list disk
select disk #
list partition

Please replace # with the number of your disk where Windows is installed.

x BlueRobot · Nov 1, 2022

I assume you've attempted to use the usual BCD commands? Could you please select the system partition from diskpart and then provide a screenshot of the output?

Rich (BB code):

select part 1
detail partition

The output should be similar to the following:

Rich (BB code):

DISKPART> detail partition

Partition 1
Type    : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Hidden  : Yes
Required: No
Attrib  : 0X8000000000000000
Offset in Bytes: 1048576

  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
* Volume 1         SYSTEM       FAT32  Partition    100 MB  Healthy    System

Coolnetworks · Nov 1, 2022

x BlueRobot said:
I assume you've attempted to use the usual BCD commands? Could you please select the system partition from diskpart and then provide a screenshot of the output?

Rich (BB code):

select part 1 detail partition

The output should be similar to the following:

Rich (BB code):

DISKPART> detail partition Partition 1 Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b Hidden : Yes Required: No Attrib : 0X8000000000000000 Offset in Bytes: 1048576 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- * Volume 1 SYSTEM FAT32 Partition 100 MB Healthy System

I ran the bcdboot C:\Windows /s W: /f UEFI command

The only difference I see is mine says "EFI" not System and Info is labeled "Hidden" not system.

x BlueRobot · Nov 1, 2022

It looks to be okay, is this the only disk which is bootable? If not, then I would suggest - if possible - disconnecting the other drives and then checking you're able to boot from it.

Coolnetworks · Nov 2, 2022

x BlueRobot said:
It looks to be okay, is this the only disk which is bootable? If not, then I would suggest - if possible - disconnecting the other drives and then checking you're able to boot from it.

Yes I unplugged my external drive and set the BIOS to boot from main SSD. I tried many times, it starts to boot and the BSOD Recovery mode starts.

x BlueRobot · Nov 2, 2022

That's not a BSOD error screen, it's just a recovery error message. I would suggest creating a Windows 10 .ISO and then performing a startup repair with that. Have you checked the health of the SSD using your SSD's diagnostics tools?

Coolnetworks · Nov 2, 2022

x BlueRobot said:
That's not a BSOD error screen, it's just a recovery error message. I would suggest creating a Windows 10 .ISO and then performing a startup repair with that. Have you checked the health of the SSD using your SSD's diagnostics tools?

I call it a BSOR of recovery, it's a softer version. Anyhow, I have tried the startup repairs (no joy) and checked the health of SSD all seems good. I saw another Admin use a SFC Fix program for another user but the Zip didn't have the program inside the Zip file?

x BlueRobot · Nov 3, 2022

Coolnetworks said:
I saw another Admin use a SFC Fix program for another user but the Zip didn't have the program inside the Zip file?

SFCFix isn't going to be able to repair boot issues. The only suggestion I have other than a clean install is attempt to rebuild your BCD store using the following:

Rich (BB code):

bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

Source: Use Bootrec.exe in the Windows RE to troubleshoot startup issues

Coolnetworks · Nov 3, 2022

x BlueRobot said:
SFCFix isn't going to be able to repair boot issues. The only suggestion I have other than a clean install is attempt to rebuild your BCD store using the following:

Rich (BB code):

bootrec /fixboot bootrec /scanos bootrec /rebuildbcd

Source: Use Bootrec.exe in the Windows RE to troubleshoot startup issues

I tried those commands it says Access is denied?

Coolnetworks · Nov 3, 2022

Coolnetworks said:
I tried those commands it says Access is denied?

When I tried bootrec /rebuildbcd it searches for Windows and says 0 found? Even though I'm on the Windows drive?

x BlueRobot · Nov 7, 2022

It looks like your installation is corrupted, there is no boot entries for it to boot from hence why your system isn't able to start. Did the other two commands work as well then?

There appears to be some serious issues with your installation, I would suggest using something like Hirens Rescue to get any important files you don't want to lose, then format the entire disk and then attempt to apply your .wim image as mentioned in your other thread. However, I would personally recommend just doing a complete clean install.

Search

Search

Windows DISM, SFC all not working - Pls Need help

Coolnetworks

Member

Coolnetworks

Member

Attachments

x BlueRobot

Administrator

Coolnetworks

Member

Attachments

Coolnetworks

Member

Attachments

x BlueRobot

Administrator

Coolnetworks

Member

Attachments

x BlueRobot

Administrator

Coolnetworks

Member

Attachments

x BlueRobot

Administrator

Coolnetworks

Member

x BlueRobot

Administrator

Coolnetworks

Member

Coolnetworks

Member

x BlueRobot

Administrator