P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #42 Did you typed the command at step 3 correctly ? Please post a screenshot of the command prompt also.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #43 i reboot the laptop and retry same issue Attachments Capture.PNG 8.7 KB · Views: 2 Capture2.PNG 4.8 KB · Views: 2 Capture3.PNG 6.9 KB · Views: 2 Capture4.PNG 6.9 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #44 FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file English.exe and choose Run as administrator. Copy and paste KB2699988 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Right-click on the file English.exe and choose Run as administrator. Copy and paste KB2699988 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #45 here is the result of the SearchReg Attachments SearchReg.txt 59.4 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #46 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments fixlist.txt 51.2 KB · Views: 1
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #47 here are the new files Attachments CheckSUR.log 3.6 KB · Views: 1 Fixlog.txt 105.8 KB · Views: 0
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #48 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments fixlist.txt 3.3 KB · Views: 1
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #49 here are the new files Attachments CheckSUR.log 2.8 KB · Views: 1 Fixlog.txt 3.7 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #50 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments fixlist.txt 1.7 KB · Views: 1
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #51 here are the new files Attachments CheckSUR.log 2.8 KB · Views: 1 Fixlog.txt 2 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #52 I need to have a look at the COMPONENTS hive. Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now.
I need to have a look at the COMPONENTS hive. Retrieve Components Hive 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file. 2. Please copy this file to your desktop. Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below. 3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop. 4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here. Option#2 (only if you are unable to follow the previous instructions) Please download the Freeware RegBak from here: Acelogix Software - Download products You will find it at the bottom of the page that the link brings you to. Go ahead and install this program and accept all the defaults. After the last install screen the program should open. Click the New Backup button. Accept the defaults and simply click Start. When it says Finished successfully, click the Close button. This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup... This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS. Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS. Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder. Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply. You can close any open windows you have as well as the RegBak program now.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 9, 2020 #53 here is the link for the COMPONENTS hive components.zip (17.44MB) - SendSpace.com
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 9, 2020 #54 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments fixlist.txt 7.5 KB · Views: 1
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 10, 2020 #55 here are the files Attachments CheckSUR.log 2.6 KB · Views: 1 Fixlog.txt 5.5 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 10, 2020 #56 Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Attachments fixlist.txt 393 bytes · Views: 1
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 10, 2020 #57 here is the fixlog Attachments Fixlog.txt 4.8 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 10, 2020 #58 Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply. Attachments fixlist.txt 1 KB · Views: 1
Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
E Elinar Active member Joined Jun 2, 2020 Posts 35 Jun 10, 2020 #59 here are the files Attachments CheckSUR.log 560 bytes · Views: 1 Fixlog.txt 2.5 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,691 Jun 10, 2020 #60 Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Attachments fixlist.txt 120 bytes · Views: 1
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on English.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply.