[SOLVED] sfc errors, cbs.log

S

ssntv

Active member
Joined
Jan 1, 2016
Posts
26
Hi,

After running sfc /scannow and the resulting cbs.log through sfcfix, the log is:
---------------------------------
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-09-14 19:25:23.819
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.

AutoAnalysis::
WARNING: SURT execution needed due to manifest damage on component "amd64_microsoft-windows-mediafoundation_31bf3856ad364e35_6.1.7601.24499_none_fabd0b643cbb855e". See CBS logfile for more details.

SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 4
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-09-14 19:25:31.828
----------------------EOF-----------------------


After also running SURT as advised by sfcfix log, a re-run of sfcfix says:
----------------------------------
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-09-14 19:17:58.197
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.

AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-09-14 19:18:03.746
----------------------EOF-----------------------

Attached please find the CBS.log, since re-running sfc /scannow still yields errors.

Thank you in advance for your help!
:)
 

Attachments

Hello and welcome!

Please do the following:

Step#1 - System Update Readiness Tool (SUR) Windows 7 - 64-Bit
1. Download and run the following file.
2. When it asks you if you wish to install, please answer Yes. Note: It could take several hours to run. Please don't cancel it.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post, please upload via Sendspace and just provide the link here.
 
softwaremaniac said:
Hello and welcome!

Please do the following:

Step#1 - System Update Readiness Tool (SUR) Windows 7 - 64-Bit
1. Download and run the following file.
2. When it asks you if you wish to install, please answer Yes. Note: It could take several hours to run. Please don't cancel it.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post, please upload via Sendspace and just provide the link here.
Click to expand...
Thank you!
 

Attachments

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.


Then do the following again:


Step#2 - System Update Readiness Tool (SUR) Windows 7 - 64-Bit
1. Download and run the following file.
2. When it asks you if you wish to install, please answer Yes. Note: It could take several hours to run. Please don't cancel it.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post, please upload via Sendspace and just provide the link here.
 

Attachments

Thank you!

Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-09-15 10:08:44.362
Microsoft Windows 7 Service Pack 1 - amd64
Using .zip script file at C:\Users\user\Downloads\2do\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\Temp\CheckSur\WinSxS\Manifests

Successfully copied file C:\Users\user\AppData\Local\niemiro\Archive\Manifests\amd64_microsoft-windows-mediafoundation_31bf3856ad364e35_6.1.7601.24499_none_fabd0b643cbb855e.manifest to C:\Windows\Temp\CheckSur\WinSxS\Manifests\amd64_microsoft-windows-mediafoundation_31bf3856ad364e35_6.1.7601.24499_none_fabd0b643cbb855e.manifest.

Successfully restored ownership for C:\Windows\Temp\CheckSur\WinSxS\Manifests
Successfully restored permissions on C:\Windows\Temp\CheckSur\WinSxS\Manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-09-15 10:08:44.969
Script hash: q8zC/i6t4pZAHcn+43e3/8T/MiUcMrNtHO9jw1C/m9M=
----------------------EOF-----------------------


Also ran sfc /scannow again, and it comes out clean, yay!

You are awesome! I need to learn this, to save you time :)
Thank you sooo much!
:)))

PS: What is the best way to get rid of the avast errors?
 

Attachments

Thank you again so much for your kind, fast, and accurate assistance!

*****

:)
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top