Okay so...I should probably state that I first posted this issue on Malwarebytes forums. They were kind enough to go through the whole diaganosing process and attempted several fixes. Each one though sad to say, seemed to (correct?) but at the same time make my experience even worse in the long run.
I could originally boot into the main Regular Windows 10 and now I can't even do that. If I attempt to boot into Regular Windows 10 it will just get to the Windows 10 logo with the spinning wheel and crash. I ONLY can go to safe mode currently. That is one of the major issues I guess?
Secondly, they had attempted to get me to update my Windows 10 to 1903 (from 1803) and sadly I have just ran into stumbling blocks at every corner! The Media creation tool has not worked, the troubleshooter didn't work from the microsoft site, and etc. From what I can gather there are "window components that need repairing" according to the troubleshooter.
Here is the Malwarebytes forum thread for any backstory/reading of the issue:
Windows 10 + Malwarebytes recent update
OKAY so the long introduction is now complete (I hope) so let me get down to business with you guys and gals and try to get this resolved! So from me following the steps you require in the pinned topic here are the results, logs, etc. It should be noted that there were zero infections found on my machine at Malwarebytes forums.
Remember that all steps done below are in safe mode for the reasons stated above!
Code:
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files and successfully repaired them.
For online repairs, details are included in the CBS log file located at
windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline
repairs, details are included in the log file provided by the /OFFLOGFILE flag.
I got this same message last time I attempted a sfc scan so I went to the next step
Here are the results of SURT/DISM Scan:
Code:
C:\Users\Allison>Dism /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 10.0.17134.1
Image Version: 10.0.17134.915
[===========================83.9%================ ]
Error: 1084
This service cannot be started in Safe Mode
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
So...because it can't finish that step I went to the next step: Here is the results/text of what happens
Code:
Checking for updates . . .
No new update is available at this time.
Processing directive 1 of 1 (AutoAnalysis::)
Checking store directories . . .
Checking CBS.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .
Attempting repair . . .
Stage 1
Stage 2
Stage 3
Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.
Deployment Image Servicing and Management tool
Version: 10.0.17134.1
Image Version: 10.0.17134.915
SUMMARY:
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
Press any key to continue to explanation of summary . . .
Code:
--- Displaying Message 1 of 1 ---
No corruptions have been detected on this computer. Whilst this is a good thing,be aware that not all types of corruption can be detected by this tool.
Therefore, if you are currently experiencing continued problems with your
computer it is likely that you are going to need the assistance of a human
analyst in order to find and fix them.
If your problems persist, and you are currently being instructed by a helper,
you should let them know about this development by sending them the logfile
which will soon be generated and opened so that they can perform a manual fix.
If you are not currently being instructed by a helper but still need assistance,you should seek free advice from your favourite forum or sysnative.com. Create anew thread and provide this logfile in the first post of that thread along with
a complete description of the problems you were experiencing which led you to
run this tool.
* Press any key to continue . . .
Here is the SFCFix log file. I believe the instructions just said post it in the topic sao here it is in code format.
Code:
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-07-24 00:20:02.319
Microsoft Windows 10 Build 17134 - amd64
Not using a script file.
AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.
Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-07-24 00:34:18.766
----------------------EOF-----------------------
I went to the next step as requested: Attached you will find the CBS zipped file.
