CSI Missing Winning Component Key - Lot of Missing Assembly errors when add features

DjRicky

DjRicky

Active member
Joined
Jan 10, 2023
Posts
35
Hi, I have a VM(vmware) with Windows Server 2008 R2 Standard and I have a lot of error running some programs or Windows Update or Adding new features.

The CBS folder is at: CBS.zip (107.79MB) - SendSpace.com

I would really appreciate if someone could create the fixlist.txt for the Farbar Recovery Scan Tool. Please!

I've tried everything and I don't know what to do anymore.
 

Attachments

Hello and welcome,

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
PeterJ said:
Hello and welcome,

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
    You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
Click to expand...
Thank you very much for your quick response!
Here is the requested file: COMPONENTS.zip

Another thing, it's impossible for me to run the command: Dism /Online /Cleanup-Image /RestoreHealth
I always get the error 87: The restorehealth option is not recognized in this context.
I have different versions between the tool and the image. How can I fix this?

C:\Users\Administrador.FUCHSAR>Dism /Online /Cleanup-Image /RestoreHealth

Herramienta Administración y mantenimiento de imágenes de implementación
Versión: 6.1.7600.16385

Versión de imagen: 6.1.7601.18489


Error: 87

La opción restorehealth no se reconoce en este contexto.
Consulte la ayuda para obtener más información.

El archivo de registro de DISM se encuentra en C:\Windows\Logs\DISM\dism.log


Best regards!
 

Attachments

Last edited:
Something went wrong. I thought I already posted a reply.

Another thing, it's impossible for me to run the command: Dism /Online /Cleanup-Image /RestoreHealth
Click to expand...
Please do not run other tools while we are fixing the issues.


Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following commands into it, then press enter after each.
    wusa /uninstall /KB:4074598
    Wait for this to complete.

    wusa /uninstall /KB:4093118
  4. Let me know if it says it was successful or if there are any errors.
 
Thank you very much!

I can't uninstall KB:4074598. I got error 0x80073701 missing assembly.
1674065832969.png

KB:4093118 appears to be missing or not installed
1674065890640.png

Best regards,
 
FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  6. Right-click on the file FRST64.exe and choose Run as administrator.
  7. Copy and paste KB4074598;KB4093118 into the Search box and click the Search Registry button.
  8. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  9. You may close any remaining open windows now.
 
PeterJ said:
FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  6. Right-click on the file FRST64.exe and choose Run as administrator.
  7. Copy and paste KB4074598;KB4093118 into the Search box and click the Search Registry button.
  8. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  9. You may close any remaining open windows now.
Click to expand...
Here is the result of Farbar! Thanks!!!!
 

Attachments

Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.
 

Attachments

PeterJ said:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.
Click to expand...
Thank you very much! I really appreciate your time and effort to help me fix this problem.

Do i have to do something else?
Or reboot and try?

Here is the log.
 

Attachments

Please be patient. There is more to cleanup.

Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following commands into it, then press enter after each.
    wusa /uninstall /KB:4073578
    Wait for this to complete.

    wusa /uninstall /KB:4057400
  4. Let me know if it says it was successful or if there are any errors.
 
PeterJ said:
Please be patient. There is more to cleanup.

Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following commands into it, then press enter after each.
    wusa /uninstall /KB:4073578
    Wait for this to complete.

    wusa /uninstall /KB:4057400
  4. Let me know if it says it was successful or if there are any errors.
Click to expand...
KB4073578 NOT INSTALLED:

1674475488381.png
KB4057400: NOT INSTALLED
1674475583908.png
 
Please do not quote my message into your reply. It is not needed.

FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  5. Right-click on the file FRST64.exe and choose Run as administrator.
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  6. Copy and paste KB4073578;KB4057400 into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  8. You may close any remaining open windows now.
 
Found nothing:
Farbar Recovery Scan Tool (x64) Versión: 09-01-2023
Ejecutado por Administrador (23-01-2023 13:50:30)
Ejecutado desde C:\Temp\Win2008r2
Modo de Inicio: Normal

================== Buscar en Registro: "KB4073578;KB4057400" ===========


===================== Resultado de búsqueda para "KB4073578" ==========


===================== Resultado de búsqueda para "KB4057400" ==========

====== Final de Buscar ======
 
Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following commands into it, then press enter after each.
    wusa /uninstall /KB:4088875
  4. Let me know if it says it was successful or if there are any errors.
 
PeterJ said:
Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following commands into it, then press enter after each.
    wusa /uninstall /KB:4088875
  4. Let me know if it says it was successful or if there are any errors.
Click to expand...
KB4088875 NOT INSTALLED!
1674559133529.png
And not found in registry with Farbar:
Farbar Recovery Scan Tool (x64) Versión: 09-01-2023
Ejecutado por Administrador (24-01-2023 08:23:08)
Ejecutado desde C:\Temp\Win2008r2
Modo de Inicio: Normal

================== Buscar en Registro: "KB4088875" ===========


====== Final de Buscar ======
 
Last edited:
Okay.

Reboot the machine.
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Reboot the machine.
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
 

Attachments

PeterJ said:
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Reboot the machine.
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
Click to expand...
Fixlog.txt attached!
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top