Hi Nathan,
Im writing to you using my phone because my desktop is displaying the attached screen. Not sure if this is normal?
I turned off my computer. Stuck the USB stick in. Then turned it back on. Mind you, the UEFI screen isnt automatically turned on when rebooted. Has nothing to do with pressing F2. Once my computer was turned back on, I went into Windows Settings -> Update & Recovery -> Recovery -> Advanted Start Up ->...eventually to UEFI settings just as I had done before to get to the BIOS lookalike screen. Found the boot menu and using F5/F6, i was able to switch the order around. But "USB stick" option was not there. It was just as the photo i shared before.
1. Hard disk
2. UEFI onboard LAN IPv4
3. UEFI onboard LAN IPv6
I thought maybe one of the two LAN IPv4 or LAN IPv6 was the USB stick and thought id try it out and if it doesnt work, ill come back to switch the order back.
So i put IPv4 as 1st then hard disk and then IPv6. When restarted, a prompt about IPv4 came up but nothing happened so I was able to ESC. Then a prompt about IPv6 came up momentarily then SeaTools Bootable related screens came up in rapid succession and ultimately led to the screen i attached here.
Its been about 30 min. Do i just wait or is this not working?