Windows Updates, but getting error code 80070246 = READY TO SEND EVENTS AND SYSTEM LO

K

KHRIZZLEXMANE

Active member
Joined
Dec 29, 2015
Posts
42
All. I'm going through some troubling times..
I have tons of music software that I'm intending to install, but have been advised is heavily reliant on updated components.
I've received this computer as a gift. Its a great machine, that I just need some assistance repairing.

I do not possess the restore discs for it, I've already ran Microsoft Fixit and no errors detected.
I'd also like to keep the professional software it has from windows... System is not allowing me to update due to these repairs and the new software is causing the computer to blue screen and shutdown on me on occasion.

Any help would be appreciated!!!
I'm Running:​
Dell XPS 8700 Intel Core i5 - 4430 CPU@3.00 GHZ
8.00GB of installed memory
system type is : 64 bit operating system​
​
 
I installed it and it states " no such interface supported"

:thud:[FONT=wf_segoe-ui_normal][h=1]Thank you for downloading[/h]





[/FONT]
[FONT=wf_segoe-ui_normal]
  • [h=2]System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [October 2014][/h]





    If your download does not start after 30 seconds, Click here








[/FONT]
 
Please follow the instructions below to collect and upload the CBS logs from your system:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. [sfcfixdownload]Download SFCFix[/sfcfixdownload] (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

https://dl.dropboxusercontent.com/u...ts/~Generic/Collect/CBS/SFCFixScript.txt?dl=1
 
SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-12-30 11:40:07.585
Microsoft Windows 7 Service Pack 1 - amd64
Using .txt script file at C:\Users\Mark\Desktop\SFCFixScript.txt..txt [0]








FileScan::
[0: 1] C:\Windows\winsxs\amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.1.7600.16385_none_7547f48c79b40229\MSDTC.LOG
Expected: Q4htnI+yK+Jo0DJugTfqjq40IHkXFkIWyyAaDjFGEvo=
Expected: 6.1.7600.16385 Found: Version number not available.
Successfully traced component amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.1.7600.16385_none_7547f48c79b40229.
Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery






[1: 1] C:\Windows\System32\Msdtc\MSDTC.LOG
File is untraceable.
Found: +ClrLgUJ/9a/bby1BLGrSIVKQgEhNoDFTTHqce+8dDU=
Version number not available.
Trace not available.
FileScan:: directive completed successfully.








Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2015-12-30 11:40:10.304
Script hash: yqmxX1j/+8ZyX3y6rPOmoWChAp9FEXuZ4bDqiXrV6rc=
----------------------EOF-----------------------
 
SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-12-30 11:59:10.456
Microsoft Windows 7 Service Pack 1 - amd64
Using .txt script file at C:\Users\Mark\Desktop\SFCFixScript.txt [0]








Collect:: directive completed successfully.








Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2015-12-30 12:01:13.157
----------------------EOF-----------------------
 
2015-11-09 13:28:53, Info CSI 00000005 Mismatch between identity keyform and parent key name: [ml:280{140},l:184{92}]"amd64_340566a692262b8e465d19c07ab8743a_b03f5f7f11d50a3a_6.1.7601.22617_none_389d94aec0b26316" vs. [l:184{92}]"amd64_340566a692262b8e465d19c0\u00bfab8743a_b03f5f7\u00e611d50a3a_6.1.76\u00b01.22617_none_38\u00b9d94aec0b26316" on identity 340566a692262b8e465d19c07ab8743a, Version = 6.1.7601.22617, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral2015-11-09 13:28:54, Error CSI 00000006@2015/11/9:19:28:54.060 (F) d:\win7sp1_gdr\base\lstring\lblob.cpp(2221): Error STATUS_ILLEGAL_CHARACTER originated in function RtlTranscodeLBlobs expression: __rv.UcsCharacter != (0xffffffff)
[gle=0x80004005]
2015-11-09 13:28:54, Info CBS NonStart: Failed to get store. [HRESULT = 0x80070246 - ERROR_ILLEGAL_CHARACTER]
Click to expand...

Looks like registry corruption. This is usually an indicator of bad RAM or other hardware problems.

Please follow the instructions on this page to run the memory test: Diagnosing memory problems on your computer

This test will take quite some time, I usually recommend to run it overnight when you do not need the computer.

If the results of the test are not displayed when the computer restarts, open Event Viewer then expand ‘Windows Log’ and right-click on ‘System’ and click on ‘Find’. Type in ‘MemoryDiagnostics-Results’ and click on ‘Find Next’.
The event should indicate if the test detected errors or did not detect errors.
 
thank you, I cant tell you how much I appreciate all of you help. I'll be sure to run the memory test :D Im off friday so I'll leave it running while i head off to work
 
thank you, I cant tell you how much I appreciate all of you help. I'll be sure to run the memory test :D Im off friday so I'll leave it running while i head off to work
 
"Searching from the selected event to the end of the list, there is no event that contains the specific string. To search all events, select the first event in the list and run the search again."
 
Will the test run while the system is logged in? Because it went to the blue screen that showed me it was in progress, but now that I've logged in after it prompted me to, shows no indication it's still ongoing? Lol I'm sorry for my confusion
 
That's ok. Do you have a spare flash drive or CD-R?

Let's take a look at the COMPONENTS hive.
Run the script below to collect and upload the file.

SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. [sfcfixdownload]Download SFCFix[/sfcfixdownload] (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

https://dl.dropboxusercontent.com/u...eric/Collect/COMPONENTS/SFCFixScript.txt?dl=1
 
Last edited:
zcomputerwiz said:
Once you get the components hive uploaded follow the instructions here: https://www.sysnative.com/forums/hardware-tutorials/3909-test-ram-memtest86.html
It is another memory test tool (memtest86). This one will report errors in red and will continue to run until it is stopped.

If memtest reports any errors, please stop the test and report back.
Click to expand...


SFCFix version 2.4.5.0 by niemiro.
Start time: 2015-12-31 11:32:16.625
Microsoft Windows 7 Service Pack 1 - amd64
Using .txt script file at C:\Users\Mark\Desktop\SFCFixScript.txt [0]








Collect:: directive completed successfully.








Successfully processed all directives.
SFCFix version 2.4.5.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2015-12-31 11:33:15.694
----------------------EOF-----------------------


Running the memory test tool now..
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top