Windows update problem

[didzit]

i have a lot of problems installing the update with this error message:
Installation Failure: Windows failed to install the following update with error 0x80070003: Update for Windows (KB4549951).
Windows just can't install this update on my computer.

 

[Sysnative Windows Update]

Hi!

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.

 

[didzit]

i did everything as you said

 

[Sysnative Windows Update]

Please export your CBS folder.

 

[didzit]

CBS.log ?
from C:\Windows\Logs ?

 

[Sysnative Windows Update]

Yes.

 

[didzit]

unfortunately it is larger than 20 mb
File on MEGA

 

[Sysnative Windows Update]

Thank you!

C:\Windows\Inf\setupapi.dev.log is needed as well.

 

[didzit]

here

 

[didzit]

is everything ok ??

 

[Sysnative Windows Update]

Hi!

Yes.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
3. Save any open documents and close all open windows.
4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
6. SFCFix will now process the script.
7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

 

[didzit]

I solved the problem with (1909 update) thanks to "Windows Media Creation Tool" by updating it with it. Everything works fine now. And I managed to keep all my windows settings and programs
Nevertheless thank you very much for your help.

 

[Sysnative Windows Update]

Thanks for letting me know.