Windows update failure configuring KB4503292 (Windows 7 64-bit)

D

Dreadbeard

New member
Joined
Jul 2, 2019
Posts
4
Windows update shows 1 critical update (KB4503292). I try to update, it goes through its steps, but upon restarting, it says it has a failure configuring the update and takes forever reverting back. It shows Error Code 80004005 when you view the details in Windows Update. I tried their trouble shooting mechanism (no luck). I have tried a Powershell script to reset Windows Update (no luck here either). The CBS file is to large to attach so here is the link to it: LINK
I attached the SFCFix log as well. Any help is greatly appreciated.
 

Attachments

Hello and welcome!

Please do the following:

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
If you are referring to any entries in HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters in the Registry, then no, there are not any SMB entries there or in Windows Features (no box for SMB there). Windows 7
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top