[SOLVED] Windows update failed 2019-09 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4516065)

G

gaz1986

Member
Joined
Sep 29, 2019
Posts
8
Thanks in advance for your help with this.

Every time I attempt to install the "2019-09 Security Monthly Quality Rollup for Windows 7 for x64-based systems (kb4516065)" I get an error code 80073701.

Ive seen another post with the same update and same error code. Any steps/advice would be helpful.

many thanks
gaz
 
Hi!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.


SFCFix.zip

Afterwards, please run System Update Readiness Tool and attach CheckSUR.log.
 
FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB4103718 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
6. Reboot your machine and retry updates.
 

Attachments

Updates installed successfully. Thank you very much for your assistance. I will make a donation tomorrow, you've worked very hard and deserve some credit for your knowledge.

Thank you
Gaz
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top