[SOLVED] Windows Update Error 0x80070246 on KB4515384

[freakyburrito]

I've been having issues installing cumulative update KB3415384. Things I have gone through:

• Completed an SFC /scannow. Corruption found and repaired successfully
• Completed a DISM scan. No issues found
• Completed the SFCFix tool from this site (log below)
• Attempted to download and install the standalone update. Received the same error
• Utilized the ResetWUEng tool to...
  • Reset Windows Update Components
  • Clean up superseded components
  • Repair/Reset Winsock
• CBS directory attached

Very much appreciate any assistance you can provide!

---

SFCFix version 3.0.2.1 by niemiro.

Start time: 2019-10-06 07:39:10.215
Microsoft Windows 10 Build 18362 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to generate a complete zip file. Upload aborted.


SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-10-06 08:13:50.051
----------------------EOF-----------------------

---

 

[freakyburrito]

Link for procmon capture as well

 

[Sysnative Windows Update]

Hello and welcome!

Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.

 

[freakyburrito]

Fix result of Farbar Recovery Scan Tool (x64) Version: 06-10-2019
Ran by russe (06-10-2019 09:57:23) Run:1
Running from C:\Users\russe\Desktop
Loaded Profiles: russe (Available Profiles: russe)
Boot Mode: Normal
==============================================

fixlist content:
*****************
CreateRestorePoint:
cmd: reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS
[-HKLM\COMPONENTS\CanonicalData\Deployments\microsoft-w..oyment04130_31bf3856ad364e35_10.0.18362.329_796522a2e613ad41]
*****************

Restore point was successfully created.

========= reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS =========

The operation completed successfully.


========= End of CMD: =========

HKLM\COMPONENTS\CanonicalData\Deployments\microsoft-w..oyment04130_31bf3856ad364e35_10.0.18362.329_796522a2e613ad41 => removed successfully

==== End of Fixlog 09:57:28 ====

 

[Sysnative Windows Update]

Retry updates.

 

[freakyburrito]

Success! Thank you so much for the assistance. If you don't mind me asking, what was the issue and resolution? Thanks again!

 

[Sysnative Windows Update]

There was a corrupt key in your registry, I just deleted it.