Windows Server 2019 Std - Updates failing 0x8007000d

[montrez16]

Hola,

I'm having similar issues as others where Windows server 2019 fails to install updates with error 0x8007000d. I have seen a lot of fixes from you guys, i hope you can help me troubleshoot and fix this.
The updates downloads and installs and asks for reboot. After you reboot, it goes to around 7 or 8 percent then it restart then it says undoing changes. Then it finds the updates again , and does the same in an endless loop.

I tried the the windows update troubleshooter and different internet fixes for windows updates, like the below stuff :

SC config trustedinstaller start=auto
net stop bits
net stop wuauserv
net stop msiserver
net stop cryptsvc
net stop appidsvc
Ren %Systemroot%\SoftwareDistribution SoftwareDistribution.old
Ren %Systemroot%\System32\catroot2 catroot2.old


Based on your previous post I've attached the files you typically request

 

[Maxstar]

Hi and welcome to Sysnative,

Download

SFCFix and save it to your desktop.
Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFixScript.txt and save it to your desktop.
• Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards, reboot the server and attempt to update. If it fails attach a new copy of the setupapi.log as well as the latest CBS logs.

 

[montrez16]

Thanks, however, it did not work. Here are the files requested.

 

[Maxstar]

Hi,

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFixScript.txt and save it to your desktop.
• Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards, reboot the server and attempt to update. If it fails attach a new copy of the setupapi.log as well as the latest CBS logs.

 

[montrez16]

Still no success. The problem is still present. Here are the additional files requested

 

[Maxstar]

Hi,

Please provide a new copy of the services subkey.

Export registry key as hive file.

• Open the Start menu of Windows and type CMD.
• When you see Command Prompt on the list, select the option Run as administrator.
• Copy and paste the following commands one at a time into the command prompt and press enter after each.

reg save "HKLM\SYSTEM\CurrentControlSet\Services" "%userprofile%\Desktop\Services.hiv"

• Once done, a file will appear on your desktop, called Services.hiv.
• ZIP this file and attach it to your next reply.

 

[montrez16]

Here you go.

 

[Maxstar]

Hi,

Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFixScript.txt and save it to your desktop.
• Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards, reboot the server and attempt to update. If it fails attach a new copy of the setupapi.log as well as the latest CBS logs.

 

[montrez16]

Unfortunately, that didn't work either.

 

[Maxstar]

Hi,

There are several registry keys corrupted, so here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.

• Save any work you have open, and close all programs.
• Download the attachment SFCFixScript.txt and save it to your desktop.
• Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.

• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards, reboot the server and attempt to update. If it fails attach a new copy of the setupapi.log as well as the latest CBS logs.