Windows 8 x64 BSOD PLEASE HELP !

Did problems begin before or after the installation of RegClean Pro.
Code:
Start Menu\Programs\RegClean Pro

I do not recommend 3rd party optimization software, especially if it includes registry cleaning. Such software can lead to Windows being unable to boot, damaged restore points, a damaged file system, damaged Windows files, damaged program files, corrupted registry and program installations, and eventually leads to the need to clean install Windows to fix the damage caused by the 3rd party "optimization" algorithms. I would recommend that you remove the software and avoid such software in the future. Hopefully it is not already too late.

In the future, if you need help optimizing Windows, please follow the steps given by Microsoft Windows developers to Optimize Windows for better performance.



Crashes primarily indicate a memory fault or incompatibility. Provide the following information about your hardware so we can check compatibility:

Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot. To upload all screenshots, it would be best to:
  1. generate the images using the snipping tool. Click here for information about the Snipping Tool,
  2. go to where the images are saved,
  3. right click in a blank area within the folder where the images are saved,
  4. Click here for steps to create a new folder,
  5. name the folder CPUZ,
  6. Click here for steps to select all the images,
  7. place the pointer over an image,
  8. press and hold down the left mouse button and drag the image (all images should move with it),
  9. drop the images into the CPUZ directory you created,
  10. Click here for steps to create a compressed (zipped) folder of CPUZ
  11. upload the .zip file to the forums.

Run some memory related diagnostics:

Info

If you are overclocking any hardware, please stop.


  • Run display card memory tests to check the display card for memory problems.


  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


  • Run Prime95 to test your CPU, RAM modules, and general hardware.

 
Last edited:
Did problems begin before or after the installation of RegClean Pro.
Code:
Start Menu\Programs\RegClean Pro

It happened before RegClean pro
 
Where are the rest of the CPU-Z screenshots?

What were the results of the diagnostics?

Did you remove RegClean Pro?
 
Did you add a 2GB Kingston module to your system? If so, remove it and see if it provides more stability.


As you add and remove hardware, follow these steps for ESD safety:
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
 
Back
Top