windows 8 update error 800703F1

Hello and welcome to the forum :)

This error is not a good one :(

Code: 
AutoAnalysis::
WARNING: Failed to check store directories with return code 1 and error code ERROR_FILE_NOT_FOUND. COMPONENTS hive may be corrupt.


WARNING: Components hive failed load test and may be corrupt.


WARNING: Components hive failed final reload test with error code ERROR_BADDB and may be corrupt.

  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Command prompt (Admin) => Press Yes on the prompt
  3. Inside the Command Prompt windows copy and paste the following command
    dir %systemroot%\System32\config >1&&notepad 1
    [*]Please post the contents of the notepad file back into this thread


Can you please go the following location C:\Windows\System32\config and look for the following files:
-COMPONENTS
-Any other files that start with the word COMPONENTS
-Or any files that have a similar name to COMPONENTS (it could be spelt different, have a number, a symbol etc)
If you find any please create a folder on your desktop and copy and paste all these files into this folder.
Next can you please zip this folder and upload them for me to analyze? The file may be too big to attach to this post, please use either Dropbox or One Drive.
 
The hive is really corrupt, it will not let me load it at all :(

Do you have any recent system restore points?

Click on the start button -> and type Powershell -> Right click on Powershell.exe -> Choose run as admin -> enter in the following command:
Get-ComputerRestorePoint >1
Notepad 1
Post the contents of 1.txt back into this thread.
 
Very corrupt if the hive can not be loaded. It looks like there are no recent restore points we can use to extract the hive, all of the restore points are after 20/03 (the day you gave me the COMPONENT hive). I hate to say this but you will be looking at a fresh install of windows, you might get lucky with a repair install but there is not guarantee this will solve the issue.
 
I tried to load the one without .iobit. But I did load this one just then and it loaded. We are going to try and replace your current hive with the iobit hive.



SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

SFC /SCANNOW
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Command prompt (Admin) => Press Yes on the prompt
  3. Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
  4. Please wait for this to Finish before continuing with rest of the steps.
Convert CBS.log to CBS.txt
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Run => Inside the run box copy and paste the following command:
    Code: 
    cmd /c copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  3. Press Enter
  4. Once this has completed please go to your Desktop and you will find CBS.txt, please rename this file to CBS_{Insert forum username here}_{insert todays Date here}.txt For example "CBS_Go The Power_1803.txt"
  5. Please upload CBS_{Username}_{Date}.txt to this thread.
Please Note:: if the file is too big to upload to you next post please upload via Dropbox or One Drive
 
Code: 
SFCFix version 2.4.3.0 by niemiro. Start time: 2015-04-24 11:04:20.055 Microsoft Windows 8  - amd64 Using .zip script file at C:\Users\CHUKWUDI OBI\Desktop\SFCFix.zip [0]     PowerCopy:: Successfully took permissions for file or folder C:\Windows\Sysnative\config\COMPONENTS  Successfully copied file C:\Users\CHUKWUDI OBI\AppData\Local\niemiro\Archive\COMPONENTS to C:\Windows\System32\config\COMPONENTS.  Successfully restored ownership for C:\Windows\Sysnative\config\COMPONENTS Successfully restored permissions on C:\Windows\Sysnative\config\COMPONENTS PowerCopy:: directive completed successfully.     Successfully processed all directives. SFCFix version 2.4.3.0 by niemiro has completed. Currently storing 1 datablocks. Finish time: 2015-04-24 11:04:22.508 Script hash: KzxmlhIj0w5JOBgR624cKyUNIUzixR9AHvvWEfBiJJU= ----------------------EOF-----------------------
Did I get the format right?
 
Chukizz said:
Why should I run SFC /SCANNOW again, is there a problem?
Click to expand...

To make sure the hive replacement work, it did!

There is file corruption we need to fix now:

Code: 
2015-04-24 11:31:49, Info                  CSI    000006ef Hashes for file member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.2.9200.16430_none_fdce12188b615b12\Amd64\CNBJ2530.DPB do not match actual file [l:36{18}]"Amd64\CNBJ2530.DPB" :
  Found: {l:32 b:1NwkMTpIAn18JJBSo5b5dBVCyKpHzyvRuFpL09y4Wi0=} Expected: {l:32 b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw=}

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

SFC /SCANNOW
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Command prompt (Admin) => Press Yes on the prompt
  3. Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
  4. Please wait for this to Finish before continuing with rest of the steps.
Convert CBS.log to CBS.txt
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Run => Inside the run box copy and paste the following command:
    Code: 
    cmd /c copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  3. Press Enter
  4. Once this has completed please go to your Desktop and you will find CBS.txt, please rename this file to CBS_{Insert forum username here}_{insert todays Date here}.txt For example "CBS_Go The Power_1803.txt"
  5. Please upload CBS_{Username}_{Date}.txt to this thread.
Please Note:: if the file is too big to upload to you next post please upload via Dropbox or One Drive
 
Did you run the fix I gave you??

The same file is showing as corrupt.......

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

SFC /SCANNOW
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Command prompt (Admin) => Press Yes on the prompt
  3. Inside the Command Prompt windows copy and paste the following command SFC /SCANNOW
  4. Please wait for this to Finish before continuing with rest of the steps.
Convert CBS.log to CBS.txt
  1. Right click on the
    aa922834-ed43-40f1-8830-d5507badb56c_39.jpg
    button
  2. Click on Run => Inside the run box copy and paste the following command:
    Code: 
    cmd /c copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  3. Press Enter
  4. Once this has completed please go to your Desktop and you will find CBS.txt, please rename this file to CBS_{Insert forum username here}_{insert todays Date here}.txt For example "CBS_Go The Power_1803.txt"
  5. Please upload CBS_{Username}_{Date}.txt to this thread.
Please Note:: if the file is too big to upload to you next post please upload via Dropbox or One Drive
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top