[SOLVED] [Windows 7 x64] KB4103718 fails to install

copycat10

copycat10

Active member
Joined
May 23, 2018
Posts
30
Hello,

I have another laptop were i can't install KB4103718

CBS Folder : WeTransfer

SFCFix version 3.0.0.0 by niemiro.
Start time: 2018-06-12 14:35:45.014
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2018-06-12 14:36:44.893
----------------------EOF-----------------------

Thank you for your help
 
Remove Update Manually
 1. Click on the Start button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following command into it, press enter
wusa /uninstall /KB:4054518

4. Let me know if it says it was successful or if there are any errors.
 
FRST Registry Search
 1. Click your Start button and choose Control Panel.
2. In the upper right corner ensure the View by: is set to Category.
3. Select the Programs group.
4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog. Wait until this dialog populates with information.
Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps.
5. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
6. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
7. Copy and paste KB4054518 into the Search box and click the Search Registry button.
8. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
9. You may close any remaining open windows now.
​
 
FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download attached file and save it to the Desktop.
3.Extract the file.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
4. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
5. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
6. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
7. Try updates and if any fail, attach CBS.log.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top