Windows 7, two SURT problems left...

[framistat]

Today I ran AutoSURT64.exe, noticed nearly all the problems were related to Avast, so downloaded AvastClear.exe and ran it, followed by AutoSURT64.exe again, there are just two problems left. I would much appreciate getting help clearing these two up.

CheckSUR.log:


=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2021-08-24 16:47

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI C Mark Deployment Missing 0x00000000 c!avast.vc110.crt_2036b14a11e83e4a_11.0.60610.1_0b20a8ff883c3a4a x86_avast.vc110.crt_2036b14a11e83e4a_11.0.60610.1_none_1d37a43bbfe1dc9c
(f) CSI C Mark Deployment Missing 0x00000000 c!avast.vc110.crt_2036b14a11e83e4a_11.0.60610.1_c373722873c01144 amd64_avast.vc110.crt_2036b14a11e83e4a_11.0.60610.1_none_d58a6d64ab65b396

Summary:
Seconds executed: 1741
Found 2 errors
CSI C Mark Deployment Missing Total count: 2

 

[framistat]

bump

 

[framistat]

Nevermind, I guess... reading this thread backwards from the end...

Avast, Windows 10 pro 64-bit and System File Checker

 

[PeterJ]

Hello and welcome,

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Filedropper or WeTransfer and just provide the link here.

---

Option#2 (only if you are unable to follow the previous instructions)

• Please download the Freeware RegBak from here: Acelogix Software - Download products
  You will find it at the bottom of the page that the link brings you to.
• Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
• Click the New Backup button. Accept the defaults and simply click Start.
• When it says Finished successfully, click the Close button.
• This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
• This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
• Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
• Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
• Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or WeTransfer and then just provide the link in your reply.
• You can close any open windows you have as well as the RegBak program now.