[SOLVED] Windows 7 to 10 Upgrade Failing (Error Code: 0x8007001F - 0x20006)

B

bigcheez2k3

Member
Joined
Dec 1, 2021
Posts
10
Hi, Found this forum through this thread [SOLVED] - Failed to upgrade from Win 7 Home Premium to Win 10: 0x8007001F - 0x20006 and have completed the steps from a link in there, which is this thread Windows Update Forum Posting Instructions

I am trying to upgrade form 7 to 10 using the "MediaCreationTool21H2" from Microsoft. It all goes ok, then it reboots as it should and gets to around 15% when it is updating before rebooting again and undoing everything.

The error I get is:

"0x8007001F-0x20006
the installation failed in the safe_os phase with an error during replicate oc operation"

I have tried different things mentioned from a google of the error such as deleting the windows update cache, troubleshooting the windows updater, etc but nothing has been successful so far.

Following the steps in the above thread I will not post the results of SFCFix and the CBS folder, thanks for any help


CBS Folder: CBS.rar

SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-12-01 19:16:08.720
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
WARNING: Failed to check store directories with return code 1 and error code ERROR_FILE_NOT_FOUND. COMPONENTS hive may be corrupt.


WARNING: Components hive failed load test and may be corrupt.


WARNING: Components hive failed final reload test with error code ERROR_PRIVILEGE_NOT_HELD and may be corrupt.




SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 1162
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to process registry database in location 1.
Failed to load registry hive C:\Windows\System32\config\COMPONENTS into key HKEY_LOCAL_MACHINE\COMPONENTS with error code ERROR_PRIVILEGE_NOT_HELD.

Failed to process registry database in location 2 with error code ERROR_FILE_NOT_FOUND.
WARNING: Failed to process registry database in location 3 with error code ERROR_INVALID_HANDLE.
Failed to process registry database in location 4 with error code ERROR_INVALID_HANDLE.
Failed to process registry database in location 4 with error code ERROR_FILE_NOT_FOUND.
Failed to process registry database in location 4 with error code ERROR_FILE_NOT_FOUND.
Failed to process registry database in location 4 with error code ERROR_FILE_NOT_FOUND.


SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2021-12-01 19:36:39.648
----------------------EOF-----------------------
 
Hello and welcome,

Follow the instructions below please.

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the file SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the
    myjIXnC.png
    SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Attach that file to your next reply.
 
Well done.

Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log.
  1. Download SURT for your system. (Windows 7 SP1 x64)
  2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
  3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
  4. Attach this log to your next reply.
Alternatively, if these instructions are unclear for you, you can follow the tutorial below.
System Update Readiness Tool (SURT)
 
When I try to open that executable, it says extracting but then never opens anything. If I look at the CBS.log in the CBS folder I think something is failing. I also have a CheckSUR.log I did a few days when I posted the thread initially. I will attach those both now.
 

Attachments

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Restart the computer.
Run the command SFC /SCANNOW in an elevated command prompt and report the result.
If it fails, attach the zipped cbs.log to your next reply.
 

Attachments

The contents of SFCFix.txt are below. After running SFC /SCANNOW it says "Windows Resource Protection did not find any integrity violations"


SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-12-06 19:48:40.694
Microsoft Windows 7 Service Pack 1 - amd64
Using .zip script file at C:\Users\Sam\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\servicing\packages

Successfully copied file C:\Users\Sam\AppData\Local\niemiro\Archive\packages\package_40_for_kb3175024~31bf3856ad364e35~amd64~~6.1.2.0.cat to C:\Windows\servicing\packages\package_40_for_kb3175024~31bf3856ad364e35~amd64~~6.1.2.0.cat.
Successfully copied file C:\Users\Sam\AppData\Local\niemiro\Archive\packages\package_40_for_kb3175024~31bf3856ad364e35~amd64~~6.1.2.0.mum to C:\Windows\servicing\packages\package_40_for_kb3175024~31bf3856ad364e35~amd64~~6.1.2.0.mum.
Successfully copied file C:\Users\Sam\AppData\Local\niemiro\Archive\packages\package_6_for_kb3003057~31bf3856ad364e35~amd64~~6.1.2.0.cat to C:\Windows\servicing\packages\package_6_for_kb3003057~31bf3856ad364e35~amd64~~6.1.2.0.cat.
Successfully copied file C:\Users\Sam\AppData\Local\niemiro\Archive\packages\package_6_for_kb3003057~31bf3856ad364e35~amd64~~6.1.2.0.mum to C:\Windows\servicing\packages\package_6_for_kb3003057~31bf3856ad364e35~amd64~~6.1.2.0.mum.

Successfully restored ownership for C:\Windows\servicing\packages
Successfully restored permissions on C:\Windows\servicing\packages
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2021-12-06 19:48:42.439
Script hash: hhTQVt78dxd22x9kXSYJW3fUGfoSV8kkwpljAHrB/x4=
----------------------EOF-----------------------
 
Nice. Reboot the machine.
Try to upgrade again and report the result.
 
Hi, after a few days I've gotten the chance to try the upgrade again and it is failing at the same point still, along with giving the same error message.
 
SFCFix scan:
  1. Double-click
    myjIXnC.png
    SFCFix.exe to run the tool. A dialog may come up asking for approval. If it does go ahead and allow.
  2. On completion a log file (SFCFix.txt) will be opened. Copy and Paste its content into your next reply.
 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-12-09 23:01:05.402
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 1162
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2021-12-09 23:19:57.416
----------------------EOF-----------------------
 
Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log.
  1. Download SURT for your system. (Windows 7 SP1 x64)
  2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
  3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
  4. Attach this log to your next reply.
 
Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download the file SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the
    myjIXnC.png
    SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Attach that file to your next reply.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log to your next reply.
 
Great. The CheckSur log is clean.

Restart the computer.
Run the command SFC /SCANNOW in an elevated command prompt and report the result.
If it fails, attach the zipped cbs.log to your next reply.
 
Great.
You can try the upgrade to Windows 10 again.
Make sure to have a backup of all your important data first,
 
Last edited:
I am currently writing this from Windows 10 so thank you very much for your help in making this happen, I can finally play my new games. I'll be making a donation shortly.
 
Great. Thanks ahead for the donation.

Take care.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top