Windows 7 Pro KB4516065 and KB4516033 fails with error 80240016

N

natocu

Member
Joined
Oct 8, 2019
Posts
12
I meant that even after downloading KB4516065,KB4516033 and running it which said it installed ok upon rebooting the computer the update fails and is uninstalled.



SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-10-09 14:00:34.335
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-10-09 14:02:41.688
----------------------EOF-----------------------
 
i have already installed it , but it installed ok upon rebooting the computer the update fails and is uninstalled. When i installed KB4516065 and KB4516033
 
Please let me know whether there are any warnings in your Device Manager.

Also, as a side note, Windows 7 support ends in 2 and a half months, would you consider upgrading to Windows 10?
 
There aren't any warning in my device Manager.
And I don't want to upgrade to Windows 10
 
It still not work. I upon rebooting the computer the update fails and is uninstalled.
 
Please do the following:

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
Restart Windows in Safe Mode w/networking.

Download Windows Repair (All-in-One) Portable


  • Extract the tweaking.com_windows_repair_aio.zip to c:\Windows\TEMP the zip will extract to a folder called Tweaking.com - Windows Repair
  • Execute the file Repair_Windows.exe from the Tweaking.com - Windows Repair folder, accept the Security warning and the EULA
  • Click the button Jump To Repairs
  • Click the Open Repairs button to access the following screen:
    WindowsRepair.png
  • Click the box All Repairs to uncheck all the boxes
  • Check only the following boxes:
    • 16 - Repair Windows Updates
  • Check the box Restart/Shutdown System When Finished > Restart System
  • Click the Start Repairs button
  • When the system reboots, attempt the update again.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top