[SOLVED] Windows 7 Monthly rollup fails to install, Error 80073701

T

TwilightExpress

Member
Joined
Aug 11, 2019
Posts
7
Hello Community,

unfortunatly my Windows 7 x64 System fails to install all monthly rollups for more than 6 month now. Always showing me errorcode 80073701. It first occured after i did a hardreset the system was stuck "installing" another update after booting for more than half an hour. Im sorry to say that I cannot remember what update exactly it was, maybe related to the .net framework, I could be wrong about that.


After trying several things like installing some windows update stack fix. I also tried to remove the update that got me into that mess and the removal failed.

So still nothing works..

Consulting this forum my impression is that there is no generally applicable fix...

Maybe you can help.

I followed the forum instructions and have run sfc scan, surt/dism and sfc fix:

here are my results:

SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-08-12 00:30:34.845
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 583
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-08-12 00:31:06.496
----------------------EOF-----------------------

Here are my CBS logfiles: CBS Logfiles


Thanks to everyone in advance!
 
Hello and welcome!

Please do the following fix:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

SFCFix.zip

After that has been done, run SURT again and attach CheckSUR.log.
 
Hello Softwaremaniac,

thank you for your work!

I have followed your steps attached the logfiles.

Also retried installing the update, regrettably without success yet.

Hope there are still some ideas left!

TwilightExpress
 

Attachments

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB4284826 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
6. Try updates.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top