[SOLVED] Windows 7 KB4524157 update failed with error 80073701

eusebio · Oct 6, 2019

Hi,

My Windows 7 can't install update KB4524157.

This is the SFCFix results:

Code:

SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-10-06 11:23:06.238
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
   CBS & SFC total detected corruption count:     0
   CBS & SFC total unimportant corruption count:  0
   CBS & SFC total fixed corruption count:        0
   SURT total detected corruption count:          228
   SURT total unimportant corruption count:       0
   SURT total fixed corruption count:             0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to generate a complete zip file. Upload aborted.


SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-10-06 11:27:04.966
----------------------EOF-----------------------

Attached CBS.zip file.

Thanks.

Sysnative Windows Update · Oct 6, 2019

Hi!

Please run System Update Readiness Tool as indicated by our Posting Instructions

eusebio · Oct 6, 2019

Sorry, I was wrong to follow the instructions.

eusebio · Oct 6, 2019

Attached SFCFix.txt

Here CBS.zip

Thanks.

Sysnative Windows Update · Oct 6, 2019

It appears that you did not let SURT finish. Please run it again, but ensure you leave running this time.

eusebio · Oct 6, 2019

I let it finish but a message came out saying that the update had not been installed. Will I run it again?

Sysnative Windows Update · Oct 6, 2019

Can you retry from Safe Mode?

Start Windows 7 in Safe Mode in 5 Easy Minutes

eusebio · Oct 6, 2019

In safe mode I have an error 0x8007043C and a message like this "Service can't be run in safe mode".

Sysnative Windows Update · Oct 6, 2019

Okay, try the following: https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

eusebio · Oct 6, 2019

Now it has worked.

CBS.zip

Thanks.

Sysnative Windows Update · Oct 6, 2019

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards, please run System Update Readiness Tool again and attach CheckSUR.log.

eusebio · Oct 6, 2019

Attached file.

Thanks.

Sysnative Windows Update · Oct 6, 2019

OK, please run System Update Readiness Tool again.

eusebio · Oct 6, 2019

Then you need to attach a file?

Sysnative Windows Update · Oct 6, 2019

After the tool has completed, please attach CheckSUR.log, yes.

eusebio · Oct 6, 2019

Attached CheckSUR.log.

Thanks.

Sysnative Windows Update · Oct 6, 2019

Okay, please retry updates and attach CBS.log if any updates fail.

eusebio · Oct 7, 2019

Error updating. CBS.log attached.

Thanks.

Sysnative Windows Update · Oct 7, 2019

Thanks.

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB4512506 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.

eusebio · Oct 7, 2019

Attached file.

Thanks.

[SOLVED] Windows 7 KB4524157 update failed with error 80073701

Contributor

Attachments

Inactive

Contributor

Contributor

Attachments

Inactive

Contributor

Inactive

Contributor

Inactive

Contributor

Attachments

Inactive

Attachments

Contributor

Attachments

Inactive

Contributor

Inactive

Contributor

Attachments

Inactive

Contributor

Attachments

Inactive

Contributor

Attachments