Windows 7: Error 800B0100 when trying to run Update KB2964444

[TAP]

I got a problem with a Windows Update (KB2964444). It is supposed to fix security problems with Internet Explorer 11, but every time I try to install it, I get an Error 800B0100. I ran SFCFix but that didn't fix the problem either.

 

[Go The Power]

Hello TAP and welcome to Sysnative forums :)

There are a few corrupt .cat and .mum files that need to be fixed up here.

SURT Package replacement

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download Packs.zip that is attached to this post and save this to your Desktop.
2. Right-click on the file and select Extract All...
3. Tick the box labelled Show extracted files when complete then click Extract
4. A window will open showing two folders, Manifests and Packages
5. Open the Manifests folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Winsxs\Manifests
   
6. Open the Packages folder and copy the files into the following folder (if there are any files)
   
   C:\Windows\Temp\CheckSur\Servicing\Packages
   
7. Run the System Update Readiness Tool (SURT) again.
8. When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
   
   C:\Windows\Logs\CBS\CheckSUR.log