[SOLVED] Windows 2008 R2 Standard (x64) problem with update (0x800F0900)

Hi and welcome to Sysnative. Let's see what we can do. Please start with the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please

Step#2 - System Update Readiness Tool (SUR)
1. Download and run the following file.
2. When it asks you if you wish to install, please answer yes. Note: It could take 15 minutes or more to run. Please don't cancel.
3. You will get an Installation Complete screen when it's done running.
4. Please attach the log from the following location. C:\Windows\Logs\CBS\CheckSUR.log
Please Note:: if the file is too big to upload to your next post please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.

Items for your next post
1. SFCFix.txt
2. CheckSUR.log
 

Attachments

Thanks. Please do the following.

Step#1 - Fix Corrupt/Missing Files
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Please download the attached file, Packs.zip and save this to your Desktop.
  2. Right-click on the file and select Extract All...
  3. Tick the box labelled Show extracted files when complete then click Extract
  4. A window will open showing two folders, Manifests and Packages
  5. Open the Manifests folder and copy the files into the following folder (if there are any files). If the Manifests folder doesn't exist within Winsxs you will need to create it.
    C:\Windows\Temp\CheckSur\Winsxs\Manifests
  6. Open the Packages folder and copy the files into the following folder (if there are any files). If the Packages folder doesn't exist within Servicing you will need to create it.
    C:\Windows\Temp\CheckSur\Servicing\Packages
  7. Run the System Update Readiness Tool (SURT) again.
  8. When the SURT finishes installing, zip up and attach the following log file:
    C:\Windows\Logs\CBS\CheckSUR.log
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top