[SOLVED] Windows 11 Update KB5029263: Error 0x80070002

V

VincentThacker

Active member
Joined
Aug 16, 2023
Posts
31
Hi, I have been getting error 0x80070002 when installing the recent Windows 11 Update KB5029263 (build 2134). The attached CBS.log points to a missing manifest file C:\Windows\WinSxS\Manifests\amd64_microsoft-windows-c..red-deployment01150_31bf3856ad364e35_10.0.22621.2070_zh-cn_f5dd608d58dae43e.manifest (and others). Windows reports that the update installed "successfully" yesterday, but it obviously didn't as Windows is still on build 2070. Both SFC and ComponentsScanner report no integrity violations. DISM RestoreHealth runs successfully but does not solve the problem. Things I have tried:
  1. Manually downloading the required manifest files from Microsoft Update Catalog and adding them in - This leads to a new error message in CBS: 0x800f0991 (PSFX_E_MISSING_PAYLOAD_FILE)
  2. Installing the update manually using DISM and Add-WindowsPackage - Same error
  3. Installing the update using WUSA: Claims that it is already installed; subsequent attempted uninstallation fails saying that the update is permanent and is not uninstallable. Forcibly removing the update by manually deleting the .cat & .mum file and registry entries of Package_for_RollupFix~31bf3856ad364e35~amd64~~22621.2134.1.5 and trying again resulted in WUSA attempting to install it but ends up with the same error as initially.
Something also worth mentioning is that since a while ago, my StartComponentCleanup has stopped working. It appears to run successfully but does not clear out the reclaimable packages. Disk Cleanup (which basically just runs that in the background) shows an ever increasing amount under "Windows Update Cleanup" but does not clean it at all despite running successfully. Unfortunately, I have no idea what caused it.

I would greatly appreciate any assistance.
 

Attachments

Hi and welcome to Sysnative,

Upload your COMPONENTS hive.
  • Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
  • Please copy this file to your desktop.
  • Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
  • Right-click on this file on your desktop and select Send To > Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
  • If the file is too large to upload here, upload the file to www.wetransfer.com and post the link in your next reply.
 
Please post the latest CBS logs as well, and only the following language packages are installed as I can see?

1. EN_US
2. ZH_CN
 
Hi,

Step 1. Download
56f31e53c97da-SFCFix.PNG
SFCFix and save it to your desktop.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.


Step 2. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.
Code: 
DISM /online /cleanup-image /RestoreHealth
 

Attachments

Code: 
Microsoft Windows [Version 10.0.22621.2070]
(c) Microsoft Corporation. All rights reserved.


C:\Windows\System32>DISM /online /cleanup-image /RestoreHealth


Deployment Image Servicing and Management tool
Version: 10.0.22621.1


Image Version: 10.0.22621.2070


[===========================50.6%                          ]
Error: 2


The system cannot find the file specified.


The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
 

Attachments

Step 1.
Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFixScript.txt and save it to your desktop.
  • Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.
62151e1bebac4-SFCFix-Txt-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.


Step 2. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.
Code: 
DISM /online /cleanup-image /RestoreHealth
 

Attachments

Code: 
Microsoft Windows [Version 10.0.22621.2070]
(c) Microsoft Corporation. All rights reserved.


C:\Windows\System32>DISM /online /cleanup-image /RestoreHealth


Deployment Image Servicing and Management tool
Version: 10.0.22621.1


Image Version: 10.0.22621.2070


[===========================84.9%=================         ]
[===========================85.4%=================         ]
[===========================86.0%=================         ]
[===========================86.6%==================        ]
[===========================87.2%==================        ]
[===========================87.8%==================        ]
[===========================88.4%===================       ]
[===========================88.8%===================       ]
[===========================89.4%===================       ]
[===========================90.0%====================      ]
[===========================90.6%====================      ]
[===========================91.2%====================      ]
[===========================91.8%=====================     ]
[==========================100.0%==========================]
Error: 0x800f081f


The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see https://go.microsoft.com/fwlink/?LinkId=243077.


The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
 

Attachments

Step 1.
Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.


Step 2. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.
Code: 
DISM /online /cleanup-image /RestoreHealth
 

Attachments

Code: 
Microsoft Windows [Version 10.0.22621.2070]
(c) Microsoft Corporation. All rights reserved.

C:\Windows\System32>DISM /online /cleanup-image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.22621.1

Image Version: 10.0.22621.2070

[===========================84.9%=================         ]
[===========================85.4%=================         ]
[===========================86.0%=================         ]
[===========================86.6%==================        ]
[===========================87.2%==================        ]
[===========================87.8%==================        ]
[===========================88.4%===================       ]
[===========================88.8%===================       ]
[===========================89.4%===================       ]
[===========================90.0%====================      ]
[===========================90.6%====================      ]
[===========================91.2%====================      ]
[===========================91.8%=====================     ]
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
 

Attachments

Great, please attempt to update and let me know the result. If it fails attach a new copy of the CBS logs.
 
I rebooted the system after the successful DISM. However, the update KB5029263 still fails at 100% with the same error (0x80070002). From what I can tell, the CBS.log is still complaining about a missing manifest file.
 

Attachments

Rich (BB code): 
2023-08-24 18:25:47, Error                 CSI    000000b9 (F) STATUS_OBJECT_NAME_NOT_FOUND #5232217# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::OpenFilesystemFile(flags = 0, da = (FILE_GENERIC_READ), fn = [l:140]'\SystemRoot\WinSxS\Manifests\amd64_microsoft-windows-c..d-wow64-deployment0_31bf3856ad364e35_10.0.22621.2070_zh-cn_f9dd9fb009e4cbeb.manifest', sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), oo = (FILE_SYNCHRONOUS_IO_NONALERT|FILE_NON_DIRECTORY_FILE|FILE_OPEN_FOR_BACKUP_INTENT), fil[gle=0xd0000034]
2023-08-24 18:25:47, Error                 CSI    e = NULL, disp = Invalid)

Here's the next fix.

Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.

Afterwards reboot the system and attempt to update. If it fails attach a new copy of the CBS logs.
 

Attachments

Rich (BB code): 
2023-08-24 18:52:41, Error                 CSI    0000002b (F) STATUS_OBJECT_NAME_NOT_FOUND #10462604# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::OpenFilesystemFile(flags = 0, da = (FILE_GENERIC_READ), fn = [l:140]'\SystemRoot\WinSxS\Manifests\amd64_microsoft-windows-c..wow64-deployment000_31bf3856ad364e35_10.0.22621.2070_zh-cn_70158ba08a17283f.manifest', sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), oo = (FILE_SYNCHRONOUS_IO_NONALERT|FILE_NON_DIRECTORY_FILE|FILE_OPEN_FOR_BACKUP_INTENT), fi[gle=0xd0000034]
2023-08-24 18:52:41, Error                 CSI    le = NULL, disp = Invalid)

Step 1.
Warning: This fix was written specifically for this system. Do not run this fix on another system.
  • Save any work you have open, and close all programs.
  • Download the attachment SFCFix.zip and save it to your desktop.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
6190d993a26f3-SFCFix-Zip-Eng.gif

  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Post the logfile (SFCFix.txt) as attachment in your next reply.


Step 2. Run the following DISM command and post the result. If it fails attach a new copy of the CBS log.
Code: 
DISM /online /cleanup-image /RestoreHealth
 

Attachments

It completed successfully, but with more progress bars.

Code: 
Microsoft Windows [Version 10.0.22621.2070]
(c) Microsoft Corporation. All rights reserved.

C:\Windows\System32>DISM /online /cleanup-image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.22621.1

Image Version: 10.0.22621.2070

[===========================84.9%=================         ]
[===========================84.9%=================         ]
[===========================85.1%=================         ]
[===========================85.2%=================         ]
[===========================85.4%=================         ]
[===========================85.5%=================         ]
[===========================85.7%=================         ]
[===========================85.8%=================         ]
[===========================86.0%=================         ]
[===========================86.1%=================         ]
[===========================86.1%=================         ]
[===========================86.3%==================        ]
[===========================86.4%==================        ]
[===========================86.6%==================        ]
[===========================86.7%==================        ]
[===========================86.9%==================        ]
[===========================87.0%==================        ]
[===========================87.2%==================        ]
[===========================87.3%==================        ]
[===========================87.3%==================        ]
[===========================87.5%==================        ]
[===========================87.6%==================        ]
[===========================87.8%==================        ]
[===========================87.9%==================        ]
[===========================88.1%===================       ]
[===========================88.2%===================       ]
[===========================88.4%===================       ]
[===========================88.5%===================       ]
[===========================88.7%===================       ]
[===========================88.7%===================       ]
[===========================88.8%===================       ]
[===========================89.0%===================       ]
[===========================89.1%===================       ]
[===========================89.3%===================       ]
[===========================89.4%===================       ]
[===========================89.6%===================       ]
[===========================89.7%====================      ]
[===========================89.9%====================      ]
[===========================89.9%====================      ]
[===========================90.0%====================      ]
[===========================90.2%====================      ]
[===========================90.3%====================      ]
[===========================90.5%====================      ]
[===========================90.6%====================      ]
[===========================90.8%====================      ]
[===========================90.9%====================      ]
[===========================91.1%====================      ]
[===========================91.1%====================      ]
[===========================91.2%====================      ]
[===========================91.4%=====================     ]
[===========================91.5%=====================     ]
[===========================91.7%=====================     ]
[===========================91.8%=====================     ]
[===========================92.0%=====================     ]
[===========================92.2%=====================     ]
[===========================92.3%=====================     ]
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
 
Let's try to update again, but I expect it will fail due to other corruptions for the zh-cn components.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top