Windows 10 pro 64 1809 - SFC error - Windows Resource Protection could not perform the requested operation

D

dbdan22

Contributor
Joined
Jun 6, 2017
Posts
179
Hi,

Windows 10 pro 64 1809 - recently updated from 1803.

Running certain EXE's was giving DLL errors - C:\windows\system\netapi32.dll is either not designed to run on windows or it contains an error. try installing the program again using the original installation media... error status 0xc0000020.
Also on samcli.dll and others.

Since these are windows components, the "installing the program again" message doesn't make sense.

Ran sfc /scannow, in safe mode. Fails at 74% with "Windows resource protection could not perform the requested operation".

Ran dism /online /cleanup-image /checkhealth. it says
No component store corruption detected.
The operation completed successfully.

Ran sfcfix. It crashed on the last step. Sorry, no log

CBS folder is attached.

DLL errors persist. Would also like to get a clean SFC scan

Thanks in advance.
 

Attachments

Hello and welcome!

Please start with the following:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
Hi,

The smart status on all items is within range. Can we proceed on the assumption that it is NOT a disk error? Or do the above problem symptoms ALWAYS indicate a disk error?
 
Yes, I did see that as a possible cause. But are there others? Like I said, the SMART status is all within range. Since the problem started earlier today, one can assume that if it were HDD failure, it would be reflected in the SMART status.

System is a recent Dell still under warranty. To get the drive replaced. I would have to run Dell Diagnostics. And they also say everything is OK.

The building is about to close and I will have to leave soon. The test is running but I doubt that will be the cause.
 
I see.

If the test passes, please run the following:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.



SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

As I stated in my first post, SFCfix crashed. It did not leave a log file. The crash happened so fast I could not make out the error message. The CBS logs are attached to my first post.
 
I know, but this is different. This is a fix for your corrupt file executed through SFCFix, which should work... We are aware of the crashing issue with running SFCFix without scripts.
 
Oops. Oh I'm sorry, my bad. I should read your message thoroughly first. Sorry. One minute.........
 
Got past 74% but ...

Beginning verification phase of system scan.
Verification 77% complete.
Windows Resource Protection could not perform the requested operation.


Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-12-13 16:47:41.789
Microsoft Windows 10 Build 17763 - amd64
Using .zip script file at C:\Users\Admin\Desktop\sfcfix\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll

Failed to backup file C:\WINDOWS\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll with error code 0x1160.

Successfully copied file C:\Users\Admin\AppData\Local\niemiro\Archive\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll to C:\WINDOWS\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll.

Successfully restored ownership for C:\WINDOWS\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll
Successfully restored permissions on C:\WINDOWS\WinSxS\wow64_microsoft-onecore-a..sourcepolicy-client_31bf3856ad364e35_10.0.17763.1_none_f5e644232d2c40ae\ResourcePolicyClient.dll
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-12-13 16:47:46.471
Script hash: 3CFFmYtmH8c7hRTgFmYJIjFC/JXcCjNwtTTGUNkgis0=
----------------------EOF-----------------------
 

Attachments

Thank you. Here is the next file. We will likely have to do several more times.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.



SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

Thank you for your help. I set up remote access before I left.

Ok then

Microsoft Windows [Version 10.0.17763.914]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 40% complete.

Windows Resource Protection could not perform the requested operation.

C:\WINDOWS\system32>



Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-12-13 18:45:52.968
Microsoft Windows 10 Build 17763 - amd64
Using .zip script file at C:\Users\Admin\Desktop\sfcfix\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll

Failed to backup file C:\WINDOWS\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll with error code 0x1160.

Successfully copied file C:\Users\Admin\AppData\Local\niemiro\Archive\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll to C:\WINDOWS\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll.

Successfully restored ownership for C:\WINDOWS\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll
Successfully restored permissions on C:\WINDOWS\WinSxS\wow64_microsoft-windows-d..services-sam-netapi_31bf3856ad364e35_10.0.17763.1_none_81dcd4c152b542d9\samcli.dll
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 2 datablocks.
Finish time: 2019-12-13 18:45:56.639
Script hash: KuMALhgOWAq/K66PssbXk+dEBFK9ZGQrIx5Yku4lQzg=
----------------------EOF-----------------------
 

Attachments

BTW I ran a full CHKDSK /f /r:
note "CHKDSK is scanning unindexed files for reconnect to their original directory." below

something tells me I should repeat the sfc /scannow before I apply the sfcfix, no?

Code: 
Checking file system on C:
The type of the file system is NTFS.
Volume label is OS.

A disk check has been scheduled.
Windows will now check the disk.                       

Stage 1: Examining basic file system structure ...
  592640 file records processed.                                                       
File verification completed.
  46866 large file records processed.                                  
  0 bad file records processed.                                    

Stage 2: Examining file name linkage ...
  72269 reparse records processed.                                     
Index entry FEEDBA~1 of index $I30 in file 0x49aae points to unused file 0x20ca.
Deleting index entry FEEDBA~1 in index $I30 of file 49AAE.
The index bitmap $I30 in file 0x4b6ec is incorrect.
CHKDSK discovered free space marked as allocated in the bitmap for index $I30 for file 4B6EC.
The index bitmap $I30 in file 0x4d840 is incorrect.
CHKDSK discovered free space marked as allocated in the bitmap for index $I30 for file 4D840.
The two index entries of length 0x70 and 0x78 are either identical
or appear in the wrong order.
f6 d0 07 00 00 00 0d 00 70 00 5a 00 00 00 00 00  ........p.Z.....
40 d8 04 00 00 00 0c 00 05 45 d4 1c f2 b1 d5 01  @........E......
05 45 d4 1c f2 b1 d5 01 05 45 d4 1c f2 b1 d5 01  .E.......E......
05 45 d4 1c f2 b1 d5 01 00 10 00 00 00 00 00 00  .E..............
3c 03 00 00 00 00 00 00 20 00 00 00 00 00 00 00  <....... .......
0c 02 31 00 42 00 30 00 33 00 44 00 33 00 7e 00  ..1.B.0.3.D.3.~.
31 00 2e 00 43 00 44 00 46 00 00 00 00 00 00 00  1...C.D.F.......
----------------------------------------------------------------------
a6 e8 06 00 00 00 07 00 78 00 5a 00 01 00 00 00  ........x.Z.....
40 d8 04 00 00 00 0c 00 1a eb 3b d2 e8 b1 d5 01  @.........;.....
1a eb 3b d2 e8 b1 d5 01 1a eb 3b d2 e8 b1 d5 01  ..;.......;.....
1a eb 3b d2 e8 b1 d5 01 00 20 00 00 00 00 00 00  ..;...... ......
a4 1f 00 00 00 00 00 00 20 00 00 00 00 00 00 00  ........ .......
0c 02 31 00 41 00 45 00 42 00 33 00 42 00 7e 00  ..1.A.E.B.3.B.~.
32 00 2e 00 43 00 44 00 46 00 64 00 35 00 30 00  2...C.D.F.d.5.0.
8e 02 00 00 00 00 00 00 ?? ?? ?? ?? ?? ?? ?? ??  ................
Sorting index $I30 in file 4D840.
  813030 index entries processed.                                                      
Index verification completed.
CHKDSK is scanning unindexed files for reconnect to their original directory.
Recovering orphaned file 91B613~1.CDF (13C52) into directory file 4D840.
Recovering orphaned file 91b613e6f0b1d5014b1b0000b005f005.$$_system32_speech_onecore_common_en-us_1c7d86f233c96fa1.cdf-ms (13C52) into directory file 4D840.
Recovering orphaned file amd64_microsoft-windows-i..nal-keyboard-kbdfi1_31bf3856ad364e35_10.0.17763.1_none_4d9de4cf23278992.manifest (4E830) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..nal-nlsdownleveldll_31bf3856ad364e35_10.0.17763.1_none_f96eed41b02c9176.manifest (4E831) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..ndynamic-deployment_31bf3856ad364e35_10.0.17763.1_none_82355b4e4a4e1daf.manifest (51811) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..national-core-winpe_31bf3856ad364e35_10.0.17763.1_none_48ee9030f79f088c.manifest (53DB4) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..nearshareexperience_31bf3856ad364e35_10.0.17763.1_none_462e4a8bec8a62cd.manifest (53DB5) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..nel.appxmain.deploy_31bf3856ad364e35_10.0.17763.1_none_5a359df0940631c9.manifest (53DB6) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..nese-core-essential_31bf3856ad364e35_10.0.17763.1_none_9a8d18cb22b0ab20.manifest (57A60) into directory file 4B6EC.
Recovering orphaned file amd64_microsoft-windows-i..ndowsauthentication_31bf3856ad364e35_10.0.17763.1_none_2cdc5df98df4308f.manifest (5D792) into directory file 4B6EC.
Skipping further messages about recovering orphans.
  48 unindexed files scanned.                                       
  48 unindexed files recovered to original directory.
  0 unindexed files recovered to lost and found.                   
  72269 reparse records processed.                                     

Stage 3: Examining security descriptors ...
Cleaning up 1481 unused index entries from index $SII of file 0x9.
Cleaning up 1481 unused index entries from index $SDH of file 0x9.
Cleaning up 1481 unused security descriptors.
Security descriptor verification completed.
  110196 data files processed.                                          
CHKDSK is verifying Usn Journal...
Usn Journal verification completed.

Stage 4: Looking for bad clusters in user file data ...
  592624 files processed.                                                              
File data verification completed.

Stage 5: Looking for bad, free clusters ...
  96206154 free clusters processed.                                                      
Free space verification is complete.
Correcting errors in the master file table's (MFT) BITMAP attribute.

Windows has made corrections to the file system.
No further action is required.

486904663 KB total disk space.
101051268 KB in 397266 files.
    313432 KB in 110197 indexes.
         0 KB in bad sectors.
    715347 KB in use by the system.
     65536 KB occupied by the log file.
384824616 KB available on disk.

      4096 bytes in each allocation unit.
121726165 total allocation units on disk.
  96206154 allocation units available on disk.

Internal Info:
00 0b 09 00 fe bd 07 00 ab 64 0f 00 00 00 00 00  .........d......
63 07 00 00 ea 12 01 00 00 00 00 00 00 00 00 00  c...............

Windows has finished checking your disk.
Please wait while your computer restarts.

so there was file corruption. i don't know if the users hit the power button during a build update or what. was it due to hardware? unfortunately can't run dell diagnostics remotely

ok so sfc ran past 40%, so something is afoot. let's check the results before i do the sfcfix. ok?
 
Hi!

No, you should first run SFCFix with my zip and then SFC Scan.

There is severe corruption and based on the chkdsk results, your HDD was damaged somehow, the question is whether it was irreparably damaged or not. Please repeat chkdsk once again.
 
ok i'm going to shut it down and run full dell diagnostics on monday morning and call dell. either they'll replace the ram or disk or both. i should at least reseat the memory first.

should i even attempt another chkdsk? no, what if it crashes in the middle? double yikes!

going forward, got a question. i keep builds at bay for the max 365 days. i'm at 1809, just came in this week.

if i broke down and applied the latest build, would this fix the o/s corruption problem?
if so, should i do it with win 10 update assistant, or download the iso? or does it make a difference?

to be continued.

thank you for your help, i will make a donation.
 
Appreciate the donation!

The thing is, I don't believe you can upgrade right now, because the OS is trashed so badly that it cannot be upgraded.

I personally recommend the iso, because it saves you the time if you need to redo it (in case it fails).

Let me know what the outcome of this is.
 
i will. will be in touch on monday. thank you.

the os is trashed that badly? wow. y'know i checked the event log before i even posted, was looking for fatal errors, and nothing stood out. so this is recent, and 1809 coming in didn't help.

going back to smartctl:

this is the log file:

ummmm.... prefailure warning?!?!

Code: 
smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-w10-b17763] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 3.5
Device Model:     ST500DM009-2F110A
Serial Number:    Z9913HKG
LU WWN Device Id: 5 000c50 0a39fdd06
Firmware Version: CC43
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Dec 13 23:22:46 2019 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (  51) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x1085)    SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   069   063   006    -    10144501
  3 Spin_Up_Time            PO----   099   097   000    -    0
  4 Start_Stop_Count        -O--CK   099   099   020    -    1663
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  7 Seek_Error_Rate         POSR--   082   060   045    -    169922205
  9 Power_On_Hours          -O--CK   097   097   000    -    3443
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   099   099   020    -    1652
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0 0 0
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   057   053   040    -    43 (Min/Max 43/43)
193 Load_Cycle_Count        -O--CK   100   100   000    -    1664
194 Temperature_Celsius     -O---K   043   005   000    -    43 (0 5 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   001   001   000    -    10144501
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    3440h+47m+35.168s
241 Total_LBAs_Written      ------   100   253   000    -    13272321974
242 Total_LBAs_Read         ------   100   253   000    -    15920899747
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    512  Current Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4120  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    4800  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      10  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      00%      3439         -
# 2  Extended offline    Interrupted (host reset)      00%      3438         -
# 3  Short offline       Aborted by host               90%      3437         -
# 4  Short offline       Completed without error       00%      3437         -
# 5  Short offline       Completed without error       00%      3437         -
# 6  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    43 Celsius
Power Cycle Min/Max Temperature:     42/44 Celsius
Lifetime    Min/Max Temperature:      6/46 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            1652  ---  Lifetime Power-On Resets
0x01  0x010  4            3443  ---  Power-on Hours
0x01  0x018  6     13321765114  ---  Logical Sectors Written
0x01  0x020  6       296468974  ---  Number of Write Commands
0x01  0x028  6     15945471822  ---  Logical Sectors Read
0x01  0x030  6       271761664  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4               2  ---  Spindle Motor Power-on Hours
0x03  0x010  4               2  ---  Head Flying Hours
0x03  0x018  4            1664  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               0  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              43  ---  Current Temperature
0x05  0x010  1              37  ---  Average Short Term Temperature
0x05  0x018  1              37  ---  Average Long Term Temperature
0x05  0x020  1              46  ---  Highest Temperature
0x05  0x028  1              15  ---  Lowest Temperature
0x05  0x030  1              43  ---  Highest Average Short Term Temperature
0x05  0x038  1              31  ---  Lowest Average Short Term Temperature
0x05  0x040  1              39  ---  Highest Average Long Term Temperature
0x05  0x048  1              34  ---  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              55  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1              13  ---  Specified Minimum Operating Temperature
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top