R robb782 Contributor Joined Aug 25, 2013 Posts 25 Feb 6, 2021 #1 Hello everyone and thank you very much for your precious help. I have this problem as thread title. Attached you can find the various logs and here the link to download the components file: COMPONENTS.zip Thank you again for your great job. Attachments Logs.zip 239.1 KB · Views: 6
Hello everyone and thank you very much for your precious help. I have this problem as thread title. Attached you can find the various logs and here the link to download the components file: COMPONENTS.zip Thank you again for your great job.
bruce1270 Moderator, Windows Update Analyst, Security Analyst Staff member Joined Nov 22, 2017 Posts 2,458 Feb 8, 2021 #2 Hi Apologies for the delay - please replace the COMPONENTS hive with this modified one. Step 1 - Replace Components Hive Manually Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Download COMPONENTS.ZIP from here and save to your desktop. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract. Now we have the COMPONENTS file that we will be using to replace your current one. Navigate to C:\Windows\System32\config Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad. Note: If you get an error that the file is in use, reboot your computer and then try again. Take the file from the Components folder on your desktop and paste it into C:\Windows\System32\config Step#2 - DISM /RestoreHealth Scan Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Right-click on the Start button and select Command Prompt (Admin) When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter Dism /Online /Cleanup-Image /RestoreHealth Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead. copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt" Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread. Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or OneDrive or SendSpace and just provide the link.
Hi Apologies for the delay - please replace the COMPONENTS hive with this modified one. Step 1 - Replace Components Hive Manually Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Download COMPONENTS.ZIP from here and save to your desktop. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract. Now we have the COMPONENTS file that we will be using to replace your current one. Navigate to C:\Windows\System32\config Right-click on the current COMPONENTS file and select rename. Rename it to COMPONENTS.bad. Note: If you get an error that the file is in use, reboot your computer and then try again. Take the file from the Components folder on your desktop and paste it into C:\Windows\System32\config Step#2 - DISM /RestoreHealth Scan Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Right-click on the Start button and select Command Prompt (Admin) When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter Dism /Online /Cleanup-Image /RestoreHealth Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead. copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt" Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread. Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or OneDrive or SendSpace and just provide the link.
R robb782 Contributor Joined Aug 25, 2013 Posts 25 Feb 9, 2021 #3 Hi, here attached the log. Thank you very much! Attachments cbs.txt 5 MB · Views: 6
bruce1270 Moderator, Windows Update Analyst, Security Analyst Staff member Joined Nov 22, 2017 Posts 2,458 Feb 9, 2021 #4 Hi Did the COMPONENTS hive I sent you copy into C:\Windows\System32\config successfully?
bruce1270 Moderator, Windows Update Analyst, Security Analyst Staff member Joined Nov 22, 2017 Posts 2,458 Feb 9, 2021 #6 Hi Please also do the following Step#1 - FRST Scan 1. Please download Farbar Recovery Scan Tool and save it to your Desktop. Note: You need to run the 64-bit Version so please ensure you download that one. 2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer. 3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked). 4. Press Scan button. 5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop) 6. Please attach the log back here. 7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
Hi Please also do the following Step#1 - FRST Scan 1. Please download Farbar Recovery Scan Tool and save it to your Desktop. Note: You need to run the 64-bit Version so please ensure you download that one. 2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer. 3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked). 4. Press Scan button. 5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop) 6. Please attach the log back here. 7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
R robb782 Contributor Joined Aug 25, 2013 Posts 25 Feb 9, 2021 #7 Hi, here the first log. Attachments Addition.txt 38.8 KB · Views: 3
R robb782 Contributor Joined Aug 25, 2013 Posts 25 Feb 9, 2021 #8 And the second. Attachments FRST.txt 31.6 KB · Views: 2
bruce1270 Moderator, Windows Update Analyst, Security Analyst Staff member Joined Nov 22, 2017 Posts 2,458 Feb 9, 2021 #9 Hi Are you able to uninstall the following programs - use revo uninstaller for this Microsoft Flight Simulator SimConnect Client v10.0.60905.0 Microsoft Flight Simulator SimConnect Client v10.0.61242.0 Then try windows update again and attach CBS log if it fails.
Hi Are you able to uninstall the following programs - use revo uninstaller for this Microsoft Flight Simulator SimConnect Client v10.0.60905.0 Microsoft Flight Simulator SimConnect Client v10.0.61242.0 Then try windows update again and attach CBS log if it fails.
R robb782 Contributor Joined Aug 25, 2013 Posts 25 Feb 9, 2021 #10 Hi! I have uninstalled the programs listed and then tried windows update again, everything is working and the last updates correctly installed. Thank you so much, always the best. Donation coming
Hi! I have uninstalled the programs listed and then tried windows update again, everything is working and the last updates correctly installed. Thank you so much, always the best. Donation coming
bruce1270 Moderator, Windows Update Analyst, Security Analyst Staff member Joined Nov 22, 2017 Posts 2,458 Feb 9, 2021 #11 That's great news the updates have installed. Glad we could help and I'll mark as solved. Thanks