Windows 10 1903 Can't use windows update (0xc80003fa)and sfc corrupted files

R

Rogueleeder

Member
Joined
Sep 11, 2019
Posts
12
Hi there, I've done a fresh install of Windows 10 1903 and yet can't use Windows update to check fir updates due to error (0xc80003fa) I also can't install any drivers. SFC /Scan now gives me a report of unfixed corrupted files and SFC Fix simply crashes.

Can anyone help?
 

Attachments

I've tried running DISM several times and each time it comes back successful yet the problems still remain.
 
Let's first verify the HDD:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
Here we are:

"Test #","Type","Status","% Completed","Lifetime hours","LBA of the first error"
1,"Extended offline","Completed without error","100%","1970","-"
 

Attachments

  • Capture.PNG
    Capture.PNG
    39.3 KB · Views: 2
Step#1 - FRST Fix
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system
1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Download the attached fixlist.txt and save it to the Desktop.
Note. It's important that both files, FRST64 and fixlist.txt are in the same location or the fix will not work (in this case...the desktop).
3. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
4. Press the Fix button just once and wait. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
5. When finished FRST64 will generate a log on the Desktop (Fixlog.txt). Please post the contents of it in your reply.
 

Attachments

Thanks for this! I’m currently away for the weekend but will get this run on Monday when I get back. Is that okay?
 
Thanks.

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 
The SSDs are Smart rated as good.

The RAM comes back as failing test 6 on CPU 8, this is a brand new set of RAM with a brand new Motherboard. Could it be the CPU?
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top