Hello, need help. Tried to install updates KB2930275, KB2929733. SFC returns eveything is OK, also used Reset_Windows_Update_Full.bat from sevenforums.
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
Please download the attached file, Packs.zip and save this to your Desktop.
Right-click on the file and select Extract All...
Tick the box labelled Show extracted files when complete then click Extract
A window will open showing two folders, Manifests and Packages
Open the Manifests folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Winsxs\Manifests
Open the Packages folder and copy the files into the following folder (if there are any files)
C:\Windows\Temp\CheckSur\Servicing\Packages
Run the System Update Readiness Tool (SURT) again.
When the SURT finishes installing, copy (Ctrl + C) and paste (Ctrl + V) the contents of the SURT log into your next post please:
C:\Windows\Logs\CBS\CheckSUR.persist.log
You will probably be shown the error code 0x8024200D after performing this fix, if so, please download and install the update from this link.