Win7 - Windows Update failed; PC runs through boot -> WU config loop

[RyanCD]

Hello,

I initially attempted to run Windows Update on my Windows 7 system to install all of the "Recommended" updates this morning. Many of the updates were reported as "failed" and now when I restart my PC it attempts to Configure Windows Updates, shuts down, attempts again, shuts down, and then "reverts" and on the 3rd boot finally boots to the windows desktop. When I go back into Windows Update and click "Check for Updates" it says: "Windows can't update important files and services while the system is using them. Save any open files and restart the computer, and then try to check for new updates."

However restarting the computer results in what I've described above with no change.

SFCFix Tool Log:

SFCFix version 2.4.1.0 by niemiro.
Start time: 2014-09-22 15:39:16.034
Not using a script file.


AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: -18
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.


Successfully processed all directives.
SFCFix version 2.4.1.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2014-09-22 15:44:44.695
----------------------EOF----------------------

CBS Folder:
File too large to attach here. The folder has been uploaded to my google drive and can be downloaded here:
https://drive.google.com/file/d/0B1owyVxpWvkiaVZKZ2YxUHZmNDA/edit?usp=sharing


Any help would be very much appreciated!!
Thanks,
Ryan

 

[Go The Power]

Welcome to Sysnative forums, Ryan.


I tried to download the CBS file but it said that I do not have the permission to do so.

SFCFix Collect CBS

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Download SFCFix.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
3. On your Desktop, you should now see two files: SFCFix.exe and SFCFixScript.txt.
4. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
5. SFCFix will now begin to upload your CBS logfiles to our server.
6. Upon completion, a log should be created on your Desktop: SFCFix.txt.
7. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

If all goes well, you should see that your logfiles have now been added to your thread.