I have a Win10 installation which cant boot up. It tries once, then reboots into "atempting to repair" and nothing happens from there.
I have tried booting on a media creation tool usb stick, but when booting on this it ends up with a single option popup like this
"you are trying to install on a windows that is trying to upgrade, will you continue to upgrade, remove usb and press yes, else press no to do a new clean install"
Yes boots over, and I havent tried no since I wont do a clean reinstall.
So I never ends in a menu where I can choose repair, safemode or anything like that.
I have dual boot so can boot up in linux, and can acces the drive in linux with out any problems. I can even do a file check on the ssd with ntfsfix and it says its fine.
I can also mount the 500mb recovery boot partition windows make.
In that is a \Windows\Logs\RecEnv_Ramdisk\setupact.log
And from the last "trying win10 boot" is a log:
is it helpful? or any other log?
I have tried booting on a media creation tool usb stick, but when booting on this it ends up with a single option popup like this
"you are trying to install on a windows that is trying to upgrade, will you continue to upgrade, remove usb and press yes, else press no to do a new clean install"
Yes boots over, and I havent tried no since I wont do a clean reinstall.
So I never ends in a menu where I can choose repair, safemode or anything like that.
I have dual boot so can boot up in linux, and can acces the drive in linux with out any problems. I can even do a file check on the ssd with ntfsfix and it says its fine.
I can also mount the 500mb recovery boot partition windows make.
In that is a \Windows\Logs\RecEnv_Ramdisk\setupact.log
And from the last "trying win10 boot" is a log:
Code:
2018-12-20 19:54:21, Info Starting enumeration of PnP devices.
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReIsWimBootEnabled
2018-12-20 19:54:22, Info [recenv.exe] Parameters: pszWinDir: D:\WINDOWS
2018-12-20 19:54:22, Info [recenv.exe] RegGetValue failed. Error: 0x2.
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReIsWimBootEnabled returns 0 with last error: 0x0
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReGetConfig
2018-12-20 19:54:22, Info [recenv.exe] Parameters: configWinDir: NULL
2018-12-20 19:54:22, Info [recenv.exe] WinRE config file path: D:\WINDOWS\system32\Recovery\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
2018-12-20 19:54:22, Info [recenv.exe] System is WimBoot: FALSE
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReGetConfig
2018-12-20 19:54:22, Info [recenv.exe] Parameters: configWinDir: NULL
2018-12-20 19:54:22, Info [recenv.exe] WinRE config file path: D:\WINDOWS\system32\Recovery\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
2018-12-20 19:54:22, Info [recenv.exe] System is WimBoot: FALSE
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0
2018-12-20 19:54:22, Info Invalid launch type for OEM-Front-End, 0x4
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReGetConfig
2018-12-20 19:54:22, Info [recenv.exe] Parameters: configWinDir: NULL
2018-12-20 19:54:22, Info [recenv.exe] Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
2018-12-20 19:54:22, Info [recenv.exe] System is WimBoot: FALSE
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0
2018-12-20 19:54:22, Info Auto launch narrator not specified
2018-12-20 19:54:22, Info Custom boot app not specified
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReGetConfig
2018-12-20 19:54:22, Info [recenv.exe] Parameters: configWinDir: NULL
2018-12-20 19:54:22, Info [recenv.exe] Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
2018-12-20 19:54:22, Info [recenv.exe] System is WimBoot: FALSE
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0
2018-12-20 19:54:22, Info OS volume was not locked or couldn't be processed. Defer unlocking remaining volumes. 0x00000000
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReCreateLogInstanceEx
2018-12-20 19:54:22, Info [recenv.exe] Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReCreateLogInstanceEx returns error code 0x0
2018-12-20 19:54:22, Info [recenv.exe] Enter WinReGetConfig
2018-12-20 19:54:22, Info [recenv.exe] Parameters: configWinDir: NULL
2018-12-20 19:54:22, Info [recenv.exe] Using recovery file at \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] WinRE config file path: \\?\GLOBALROOT\Device\HarddiskVolume3\RECOVERY\WINDOWSRE\ReAgent.xml
2018-12-20 19:54:22, Info [recenv.exe] Update enhanced config info is enabled.
2018-12-20 19:54:22, Info [recenv.exe] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo (In WinPE) Using winre guid from the config file
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed
2018-12-20 19:54:22, Info [recenv.exe] WinRE is installed at: \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
2018-12-20 19:54:22, Info [recenv.exe] System is WimBoot: FALSE
2018-12-20 19:54:22, Info [recenv.exe] Exit WinReGetConfig return value: 1, last error: 0x0
2018-12-20 19:54:22, Info Offline scanning application not configured
2018-12-20 19:54:22, Error Invalid path specified
2018-12-20 19:54:22, Info Copying logs from [X:\windows\Logs\RecEnv] to [D:\WINDOWS\Logs\RecEnv_Ramdisk]is it helpful? or any other log?
