What's new

[SOLVED] WIN 7[64] / KB4480970 Received and installed, but receive again and again

Qartvela

Well-known member
Joined
Jan 26, 2019
Messages
49
WIN 7[64]
KB4480970 already received and already installed, but receiving and receiving this update in Windows Update:

Code:
2019-01 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4480970)

Download size: 31 KB

You may need to restart your computer for this update to take effect.

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information: 
http://support.microsoft.com/help/4480970

Help and Support: 
http://support.microsoft.com/help/4480970
I try install this update from Windows Update Catalog and result is a: Success
But same... Received again KB4480970

If I hide KB4480970 update, next I receive:
Code:
2018-12 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4471318)

Download size: 31 KB

You may need to restart your computer for this update to take effect.

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information: 
http://support.microsoft.com/help/4471318

Help and Support: 
http://support.microsoft.com/help/4471318
Installed from stock updater and from Update Catalog, but again I receive KB4471318.
If hide KB4471318, next I receive:
Code:
2018-11 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4467107)

Download size: 31 KB

You may need to restart your computer for this update to take effect.

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information: 
http://support.microsoft.com/help/4467107

Help and Support: 
http://support.microsoft.com/help/4467107
...

How to solve this problem?

Code:
C:\Users\Administrator>sfc /scannow

Beginning system scan.  This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.
Log from SFCFix:
Code:
SFCFix version 3.0.1.0 by niemiro.
Start time: 2019-01-26 12:31:43.492
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to generate a complete zip file. Upload aborted.


SFCFix version 3.0.1.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2019-01-26 12:37:13.552
----------------------EOF-----------------------
CBS: CBS.zip - Google Drive
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Hello and welcome,

Do you have Avast still installed and if so, which version ?

Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log.

  1. Download SURT for your system. (Windows 7 SP1 x64)
  2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
  3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
  4. Attach this log in your next reply.
Alternatively, if these instructions are unclear for you, you can follow the tutorial below.

System Update Readiness Tool (SURT)
 

Qartvela

Well-known member
Joined
Jan 26, 2019
Messages
49
@PeterJ
Hello and welcome
Hello, Thank you and many thanks for fine forum/support.

Do you have Avast still installed and if so, which version ?
No, installed only one time, hidden installation from DriverPack, after successful installation, I deleted it from PC.

View attachment CheckSUR.zip

Code:
Summary:
Seconds executed: 826
 Found 98 errors
 Fixed 98 errors
  CSI F Mark Bad Type Total count: 90
  Fixed: CSI F Mark Bad Type.  Total count: 90
  CSI Missing Winning Component Key Total count: 8
  Fixed: CSI Missing Winning Component Key.  Total count: 8
 

Qartvela

Well-known member
Joined
Jan 26, 2019
Messages
49
After successful installation SURT
1) Reboot PC
2) Installed KB4480970
3) Reboot PC
4) But again received update: KB4480970
5) Again installed SURT
6) New CheckSUR.log:
Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2019-01-27 10:18

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 696
 No errors detected
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Nice, the AVAST corruptions have already been fixed.
I need to have a look at your SOFTWARE hive.

Retrieve Software Hive
1. Navigate to C:\Windows\System32\Config and locate the SOFTWARE file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named SOFTWARE.ZIP on your desktop.
4. Upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
5. Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!


Option#2 (only if you are unable to follow the previous instructions)


  • Please download the Freeware RegBak from here: Acelogix Software - Download products
    You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named SOFTWARE.
  • Copy the SOFTWARE file to your Desktop. If the SOFTWARE file does not exist, please fetch it instead from C:\Windows\System32\config\SOFTWARE.
  • Now right-click on the SOFTWARE file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (SOFTWARE.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are FileDropper or One Drive or SendSpace.
  • Note:Send the downloadlink in a private message as the SOFTWARE hive contains sensitive information!
  • You can close any open windows you have as well as the RegBak program now.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Check Windows Update again and report the result.
If it fails, run sfc /scannow again and attach the zipped cbs.log to your next reply.
 

Qartvela

Well-known member
Joined
Jan 26, 2019
Messages
49
Installed:
Code:
2019-01 Security Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4480970)

Installation date: ‎28.‎01.‎2019 9:03

Installation status: Successful

Update type: Important

A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.

More information: 
http://support.microsoft.com/help/4480970

Help and Support: 
http://support.microsoft.com/help/4480970
But I can`t see this update in Installed Updates and received again this update with name KB4480970 :(

If it fails
No, not fails. Installation always success with this update.
 

Qartvela

Well-known member
Joined
Jan 26, 2019
Messages
49
CheckSUR.log:
Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2019-01-28 10:16
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store

Summary:
Seconds executed: 654
 No errors detected
sfc /scannow:
Code:
C:\Users\Administrator>sfc /scannow

Beginning system scan.  This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.
New View attachment CBS.zip started from line:
Code:
2019-01-28 10:39:49, Info                  CBS    Starting TrustedInstaller initialization.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
64-bit: Downloading Farbar Recovery Scan Tool

2. Right-click to run the tool as administrator. When the tool opens click Yes to disclaimer.
3. Note: Ensure that the Addition.txt check box is checked at the bottom of the form within the Optional Scan area.
4. Press the Scan button.
5. Please wait for the tool to finish. It will produce two logfiles called FRST.txt and Addition.txt in the same directory the tool is run from (which should be the desktop)
6. Post the logfiles FRST.txt and Addition.txt as attachment in your next reply.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

1. Download the attachment fixlist.txt and save it to your desktop.
2. Right-click on FRST64.exe and select "Run as administrator".
3. Press the Fix button.
4. The tool will now process fixlist.txt.
5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
7. Post the logfile Fixlog.txt as attachment in your next reply.
 

Attachments

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Attach the following files to your next reply:
- the zipped cbs.log
- C:\Windows\WindowsUpdate.log or zipped if to big.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Attach the file C:\Windows\Logs\CBS\CbsPersist_20190128114413.cab to your next reply.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.



Option#2 (only if you are unable to follow the previous instructions)


  • Please download the Freeware RegBak from here: Acelogix Software - Download products
    You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 

PeterJ

Security Analyst, Windows Update Senior Analyst, Sysnative Staff
Joined
Dec 14, 2014
Messages
3,036
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

1. Download the attachment fixlist.txt and save it to your desktop.
2. Right-click on FRST64.exe and select "Run as administrator".
3. Press the Fix button.
4. The tool will now process fixlist.txt.
5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
7. Post the logfile Fixlog.txt as attachment in your next reply.
 

Attachments

Top