[SOLVED] [W10v1703b15063 x64] Can not update 2017 - 10 Cumulative Update Error 0x80070246

K

Konjin

Member
Joined
Oct 19, 2017
Posts
11
Hello,

Since about a month I have issues with updating my Windows 10. I've tried several fixes I found on Google but they won't work.
I hope you can understand my post despite the Dutch language of my computer.

This is the error I get when updating Windows:
2017-10 Cumulatieve update voor op Windows 10 Version 1607 for x64 gebaseerde systemen (KB4041691) - Fout 0x80070246

Step#2:
Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. Alle rechten voorbehouden.

C:\WINDOWS\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.

C:\WINDOWS\system32>

Step#3:
Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. Alle rechten voorbehouden.

C:\WINDOWS\system32> Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.0

Image Version: 10.0.14393.0

[======= 12.1% ]
Error: 582

Er is een illegaal teken gevonden. Voor een multibyte-tekenset betekent dit een voorloopbyte zonder een opeenvolgende volgbyte. Wanneer het de Unicode-tekenset betreft omvat dit de tekens 0xFFFF en 0xFFFE.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

C:\WINDOWS\system32>

Step#4:
Welcome to SFCFix by niemiro and sysnative.com.

Checking for updates . . .
No new update is available at this time.

Processing directive 1 of 1 (AutoAnalysis::)
Beginning flash scan of Windows Update registry.
This process will take about ten minutes.


Failed to create zip file with errno 2
Failed to create zip file with errno 2
Failed to create zip file with errno 2
Failed to create zip file with errno 2
Scan completed with warnings.

Checking store directories . . .
Checking CBS.log . . .
Checking CheckSUR.log . . .
Checking CheckSUR.persist.log . . .

Attempting repair . . .
Stage 1
Stage 2
Stage 3

Due to the nature of your corruptions, scan times have been extended by
approximately 15-20 minutes. Please be patient and allow the operation to
complete.


Deployment Image Servicing and Management tool
Version: 10.0.14393.0

Image Version: 10.0.14393.0

[======= 12.1% ]
Error: 582

Er is een illegaal teken gevonden. Voor een multibyte-tekenset betekent dit een voorloopbyte zonder een opeenvolgende volgbyte. Wanneer het de Unicode-tekenset betreft omvat dit de tekens 0xFFFF en 0xFFFE.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Step#5:
View attachment CBS.rar
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Hi and welcome to Sysnative. Sorry for the delay. Are you still in need of assistance?
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Yes, I'm still looking for a solution to this problem.
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Please do the following.

Retrieve Components Hive
 1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.
  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCScript.txt, and save this to your Desktop.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
  5. Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please
 

Attachments

Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-10-28 18:43:31.725
Microsoft Windows 10 Build 14393 - amd64
Using .txt script file at C:\Users\Hondorp\Desktop\SFCScript.txt [0]




RegistryScript::
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.

Successfully imported registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.

Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.
RegistryScript:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2017-10-28 18:43:31.804
Script hash: fjm2R3fBzxWPw9nriWq+JymigBwuYO5YPixtd6dqjjk=
----------------------EOF-----------------------
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Good. Next, do the following.

Step#1 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Right-click on the Start button and select Command Prompt (Admin)
  2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
    Dism /Online /Cleanup-Image /RestoreHealth
  3. Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
    Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service such as Dropbox or One Drive or SendSpace and just provide the link.
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. Alle rechten voorbehouden.

C:\WINDOWS\system32> Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.0

Image Version: 10.0.14393.0

[======= 12.1% ]
Error: 582

Er is een illegaal teken gevonden. Voor een multibyte-tekenset betekent dit een voorloopbyte zonder een opeenvolgende volgbyte. Wanneer het de Unicode-tekenset betreft omvat dit de tekens 0xFFFF en 0xFFFE.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

C:\WINDOWS\system32>
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Thanks. Please do the following.

Step#1 - Capture Process Monitor Trace
 1. Download and run Process Monitor. Leave this running while you perform the next steps.
2. Open an elevated Command Prompt and run Dism /Online /Cleanup-Image /RestoreHealth just like you have in the past.
3. Stop Process Monitor as soon as DISM fails. You can simply do this by clicking the magnifying glass on the toolbar as shown below.
11908d1430506241-windows-updates-fail-repeatedly-stop-jpg


4. Select the File menu...Save... and save the file to your desktop. This is likely the default location. The name (unless changed) will be LogFile.PML. This is fine.
5. Zip up and attach the LogFile.PML file as well as your CBS.log.
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCScript.txt, and save this to your Desktop.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
  5. Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please
 

Attachments

Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-10-30 10:17:10.784
Microsoft Windows 10 Build 14393 - amd64
Using .txt script file at C:\Users\Hondorp\Desktop\SFCScript.txt [0]




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2017-10-30 10:17:10.806
Script hash: SKNYl2tvwYsIdpTEDkqC3K2Xm1yGWgGRQWVvIkPveeg=
----------------------EOF-----------------------
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Microsoft Windows [Version 10.0.14393]
(c) 2016 Microsoft Corporation. Alle rechten voorbehouden.

C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth

Deployment Image Servicing and Management tool
Version: 10.0.14393.0

Image Version: 10.0.14393.0

[======= 12.1% ]
Error: 582

Er is een illegaal teken gevonden. Voor een multibyte-tekenset betekent dit een voorloopbyte zonder een opeenvolgende volgbyte. Wanneer het de Unicode-tekenset betreft omvat dit de tekens 0xFFFF en 0xFFFE.

The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

C:\WINDOWS\system32>
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Please do the following.

Step#1 - SFCFix Script
Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop. If you still have this on your desktop from downloading previously, you don't need to re-download.
  2. Download the file below, SFCScript.txt, and save this to your Desktop.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCScript.txt.
  5. Drag the file SFCScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please
 

Attachments

Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

SFCFix version 3.0.0.0 by niemiro.
Start time: 2017-10-30 16:37:10.853
Microsoft Windows 10 Build 14393 - amd64
Using .txt script file at C:\Users\Hondorp\Desktop\SFCScript.txt [0]




RegistryScript::
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.

Successfully imported registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.

Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\COMPONENTS\CanonicalData\Deployments\82602b20e77..4286df4ea9e_31bf3856ad364e35_10.0.14393.351_f4193830844fa0b3.
RegistryScript:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2017-10-30 16:37:12.041
Script hash: j6qYrF+RW1lvKrpxcyHHZFarYAY6K5mpQPfaRD3S3ig=
----------------------EOF-----------------------
 
Re: Can not update 2017-10 Cumulative Update for Windows 10 Version 1607 Error 0x8007

Thank you for all the effort to help me out.
Windows Update works like it should work.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top