Upgrade to Windows 10 Pro, version 1511,1058 / Install Problem

[richardchur]

1. Error 0x8024a206

2. Error 0xc0000005

Then 3. 0x800705b4 (twice)

Ran sfc /scannow prior, which stopped at 27%

Then ran SFCFix.exe, which led to DISM, which ran to 100% but then

Error 0x800f081f

The source files could not be found

Link to Configure a Windows Repair Source not specific enough

I don't really understand how to read / what to do with the attached CBS & DISM log files

Thanks, RC

 

[BrianDrab]

Hi and welcome to Sysnative. Sorry for the delay. I'm ready to assist on your issue. Please let me know if you are still in need of assistance.

 

[richardchur]

Hi and welcome to Sysnative. Sorry for the delay. I'm ready to assist on your issue. Please let me know if you are still in need of assistance.

Dear Brian Drab:

Thanks for the reply.

I've since done an upgrade of Window 10 to Threshold 2 via PCmover Upgrade Assistant, which went well.

It's still not quite 100% (maybe there are still bugs in Threshold 2), but at least it's better than before. Both SFC & DISM now run to 100% & report no problems.

Fingers crossed, Richard Chur.

 

[BrianDrab]

Thanks for letting me know. Take care.