[SOLVED] Updates KB4467107 and KB4467108 Fail on Win 7 Ultimate 64

Thanks. Sorry about the delay.

All steps ran fine.

Step 4 SFCFix results:
SFCFix version 3.0.0.0 by niemiro.
Start time: 2018-12-14 06:20:14.876
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.

AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 648
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2018-12-14 06:21:38.603
----------------------EOF-----------------------

Step 5 CBS log:
Download CBS.rar from Sendspace.com - send big files the easy way
 
We need to perform several steps to fix this.
Follow the instructions below please.

Stap 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.


  • Download
    myjIXnC.png
    SFCFix and move the executable to your desktop.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Close the file and attach it to your next reply.


Step 2:
Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log.

  1. Download SURT for your system. (Windows 7 SP1 x64)
  2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
  3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
  4. Attach this log in your next reply.

Alternatively, if these instructions are unclear for you, you can follow the tutorial below.

System Update Readiness Tool (SURT)
 

Attachments

Sorry, I'm confused.

Your post #4 Step 1 is the same as Step 4 on the link you gave in post #2.
and your post #4 Step 2 is the same as Step 3 on the link you gave in post #2.

I already ran through the steps on your link in post #2, which included your requests in post #4. The SFCFix.txt results are displayed in my post #3 and the entire CBS folder is also uploaded and linked in post #3.

Please advise.
 
Your post #4 Step 1 is the same as Step 4 on the link you gave in post #2.
Click to expand...
No, it is not.
In post #2, step 4, SFCFix is used to scan only and in some cases do some automated repairs.
In post #4, step 1, SFCFix is used to fix some corruptions for your machine only. Note the red colored text. After that fix we like to see the results and if there are remaining issues. That's why step 2 is added.
 
Follow the instructions below please.

Stap 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. If you need assistance with an issue, please start a new thread and someone will assist you shortly.


  • Download the file SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the
    myjIXnC.png
    SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 
Do you still have Avast installed and if so, which version ?

Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to SendSpace and just provide the link here.


Option#2 (only if you are unable to follow the previous instructions)


  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Filedropper or One Drive or SendSpace and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
I don't mind uninstalling Avast,
Click to expand...
You can keep Avast as it is. There are some remnants from previous versions of Avast to clean up.

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
64-bit: Downloading Farbar Recovery Scan Tool

2. Download the attachment fixlist.txt and save it to your desktop.
3. Right-click on FRST64.exe and select "Run as administrator".
4. Press the Fix button.
5. The tool will now process fixlist.txt.
6. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
7. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
8. Post the logfile Fixlog.txt as attachment in your next reply.

Step 2:
Start the System Update Readiness Tool (SURT) again.
On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
 

Attachments

Well done.

Check Windows Update again and report the result.
If it fails, run sfc /scannow again and attach the zipped cbs.log to your next reply.
 
Thank you for all your help.

Unfortunately, the update still failed. But this time it shows KB4471318. It used to be KB4467107 & 8, but the only one showing queued up now is 4471318.
Shows error code 80073701 after the update fails.

SFC scannow ran fine.

Attached is the zipped CBS file from the C:\Windows\Logs\CBS folder.
 

Attachments

Remove Update Manually
1. Click on the Start button and in the search box, type Command Prompt.
2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
3. When command prompt opens, copy and paste the following command into it, then press enter.
wusa /uninstall /KB:4019265

4. Let me know if it says it was successful or if there are any errors.
 
Please do following:

FRST Registry Search
1. Click your Start button and choose Control Panel.
2. In the upper right corner ensure the View by: is set to Category.
3. Select the Programs group.
4. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog.
Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.

5. Right-click on the file FRST64.exe and choose Run as administrator.
6. Copy and paste KB4019265 into the Search box and click the Search Registry button.
7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
8. You may close any remaining open windows now.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top