[SOLVED] Update error 0x80070003 when installing kb4530684

T

trakatraka

Member
Joined
Jan 2, 2020
Posts
10
Hello!

I'm having problems upgrading my windows 10 1903. I cannot upgrade to 1909 or install other updates like kb4530684. I get error 0x80070003
I've tried several procedures to repair Windows update service. I tried the same of this thread:
[SOLVED] - Most recent installation attempt failed on 12/14/209 - 0x80070003 - KB4530684

SFCFix did not find the error. Also tried to delete SoftwareDistibution folder and I executed DISM commands to solve this tipical problems, but didn't work.

I've attached C:\Windows\Inf\setupapi.dev.log and SFCFix.txt logs. Hope you can help me!
If you need any other file, just tell me.

Thanks in advance,
Linder
 

Attachments

Hi!

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
It starts the update, then ask for reboot to continue the update process.
After the restart, the progress reaches 7% and then I see a message "We couldn't complete the updates. Undoing changes". And it reverts all the canges.
I noticed that the error is the same when I try to upgrade to version 1909, not only with the KB4530684, as I stated in the subject of the thread.
 
Please do the following:

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
Thank you!

SFCFixScript.txt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.[/list]
 

Attachments

Here it is
SFCFix version 3.0.2.1 by niemiro.
Start time: 2020-01-03 02:22:03.357
Microsoft Windows 10 Build 18362 - amd64
Using .txt script file at C:\Users\agm_n\Desktop\upgrade\SFCFixScript.txt [1]




FileScan::
WARNING: There may be further unlisted copies of some of these files on the system.

[0: 1] C:\Windows\setupact.log
File is untraceable.
Found: uFVps16K6xi9ZRcSFvHIfZgVCz1gXzwu/oHP3Umy3/g=
Version number not available.
Trace not available.



[1: 1] C:\Windows\setuperr.log
File is untraceable.
Found: 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=
Version number not available.
Trace not available.
FileScan:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2020-01-03 02:22:13.695
Script hash: dGVyH1knFwCO/A9Xqhjqle2YgKUshOPnySE9GOhfapE=
----------------------EOF-----------------------
Click to expand...
 
Thanks.
I will backup everything and try to repair the OS as you suggested.
If I'm successful, I will report you.


Thanks, and regards
Linder
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top