Unable to Patch Server 2012 - Repeated Failures

D

DynamicJosh

Active member
Joined
Jul 5, 2023
Posts
27
Hello!

This machine has been unable to patch through Windows Updates since June of 2022. The error code found in the Setup log is always "0x800f0816" or "0x8007000d". I tried installing the standalone update package from the Microsoft catalog but it still fails. The machine is currently on Windows 9200.23462.

1) Ran SFC - No errors
2) Ran DISM - Component store corruption repaired
3) Ran ComponentsScanner - No corruptions detected in components hive
4) Collected CBS logs

Thanks in advance!
 
Hello and welcome,

Please perform the following scan.
FRST Scan:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  2. Download the attachment fixlist.txt and save it to your desktop.
  3. Right-click on FRST64.exe and select "Run as administrator".
  4. Press the Fix button.
  5. The tool will now process fixlist.txt.
  6. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  7. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  8. Attach the logfile Fixlog.txt to your next reply.
 

Attachments

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Restart the machine.
Check Windows Update again and report the result.
If it fails, copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 

Attachments

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
Copy the file C:\Windows\Logs\dism\dism.log to your desktop.
Zip the copied file and attach the zipped dism.log to your next reply.
 
Provide a screenshot of the list with available important updates.
Provide a screenshot of the error message you get when installing an update.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top