Unable to install KB3191566

A

Andre van Dijken

Member
Joined
Dec 4, 2019
Posts
7
Hi,
I want to have powershell 5.1 on my Windows 7 workstation but I am unable to install KB3191566. It says that it is already installed.
If I try to uninstall this KB3191566 will result in a message that it isn't installed.

I did:
run sfc /scannow
installed the system update readiness tool
run sfcfix tool

None of these fixed my problem.
Please provide my a solution.
 
Thank you.

Please start by testing your HDD:

GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
Thanks.

FRST Registry Search
1. Click your Start button and type in cmd.
2.After you find the Command Prompt, right click on it and select Run as Administrator.
3. Copy and paste the following into the Command Prompt:

reg load HKLM\COMPONENTS C:\WINDOWS\SYSTEM32\CONFIG\COMPONENTS

4. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
5. Run FRST64 by Right-Clicking on the file and choosing Run as administrator.
6. Copy and paste KB3191566 into the Search box and click the Search Registry button.
7. When the scan is complete a notepad window will open with the results. Please attach this to your next reply. It is saved on your desktop named SearchReg.txt.
 
Farbar Recovery Scan Tool (x64) Version: 05-12-2019
Ran by dijke012 (06-12-2019 17:43:51)
Running from D:\
Boot Mode: Normal

================== Search Registry: "KB3191566" ===========


====== End of Search =
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top