[SOLVED] Unable to fix component corruption

D

dcolarusso

Member
Joined
Nov 2, 2018
Posts
22
I have been working on this for days, no update will install and when dism to remove and add packages they fail with componenent corruption.
DISM /online /cleanup-image /restorehealth will not run. (states restorehealth is not a valid option.)

I am following the sysnative instruction for this forum and am attaching files. Issue with this is my CheckSUR directory
is 19.2 GB, I am going to upload just the CheckSur.log file for now.
 

Attachments

Hello and welcome!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.



  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put
    Code:
    tags around the log to break up the text.





SFC Scan



  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

Tried installing kb4457144 after running the script. installed and rebooted, and failed configuration after reboot
 

Attachments

Is there a more recent log available? A file called setupapi.dev.log without the date and time? This one is old and most likely from before your issues started.
 
Same Error, installed updates then rebooted and the updates fail to configure.
 

Attachments

  • ITapp25 Fail Config.jpg
    ITapp25 Fail Config.jpg
    19.3 KB · Views: 0
It completed the update and then required a reboot.
As soon as it started it stated, failure to configure windows updates, no percentage.
 
Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right click to run as administrator. When the tool opens click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top