[SOLVED] Trying to install KB3191566-x64 but stuck on Initializing Installation Windows 7 x64 SP1

D

daniel046

New member
Joined
Mar 17, 2022
Posts
4
Hello, I am trying to install Windows Management Framework 5.1 I got the Win7AndW2K8R2-KB3191566-x64.msu file to install windows management framework 5.1.

A week ago I tried installing and it was installing but lost a power so had to restart installation but would stuck on initializing installation. I tried restarting msi installer service, bits service, windows update service, and cryptSvc, also renaming softwaredistrubution to .old, tried restarting. used sfc /scannow, also installed system update readiness tool and that installed perfectly fine.

My cbs folder was close to 84 MB, so uploaded it to sendspace and link is CBS.zip (81.47MB) - SendSpace.com

My PC Specs

Win 7 Professional SP 1
14.0 gb ram
AMD A6-3600 APU
64 bit operating system
 
Hello and welcome,

Follow the instructions below please.

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download
    myjIXnC.png
    SFCFix and move the executable to your desktop.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2: Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If it fails again try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or One Drive or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 

Attachments

Thanks for your help,

content of files were


Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2022-03-22 17:20:25.161
Microsoft Windows 7 Service Pack 1 - amd64
Using .zip script file at C:\Users\Owner\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\servicing\packages
Successfully took permissions for file or folder C:\Windows\servicing\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.mum

Successfully copied file C:\Users\Owner\AppData\Local\niemiro\Archive\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.cat to C:\Windows\servicing\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.cat.
Successfully copied file C:\Users\Owner\AppData\Local\niemiro\Archive\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.mum to C:\Windows\servicing\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.mum.

Successfully restored ownership for C:\Windows\servicing\packages
Successfully restored permissions on C:\Windows\servicing\packages
Successfully restored ownership for C:\Windows\servicing\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.mum
Successfully restored permissions on C:\Windows\servicing\packages\Package_413_for_KB4012215~31bf3856ad364e35~amd64~~6.1.1.2.mum
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 2 datablocks.
Finish time: 2022-03-22 17:20:29.872
Script hash: rJBbegP5ZPQpZBEqzkIn9/3KLfwgzClL2IRQZ+Wnoc4=
----------------------EOF-----------------------

and link for components file is Gofile - Free file sharing and storage platform


Thanks again
 
Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  2. Download the attachment fixlist.txt and save it to your desktop.
  3. Right-click on FRST64.exe and select "Run as administrator".
  4. Press the Fix button.
  5. The tool will now process fixlist.txt.
  6. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  7. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  8. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Follow the instructions below to run a scan with the System Update Readiness Tool (SURT) and provide a log.
  1. Download SURT for your system. (Windows 7 SP1 x64)
  2. Once downloaded, execute the installer, and go through the installation (this process can take around 15-20 minutes).
  3. On completion, a log will be created in C:\Windows\Logs\CBS\CheckSUR.log.
  4. Attach this log to your next reply.
Alternatively, if these instructions are unclear for you, you can follow the tutorial below.
System Update Readiness Tool (SURT)
 

Attachments

Great. The CheckSur log is clean.
Try to install KB3191566 only and report the result.
If it fails copy the file C:\Windows\Logs\CBS\cbs.log to your desktop.
Zip the copied file and attach the zipped cbs.log to your next reply.
 
Great. I will mark this thread as solved.

Follow the instructions below to cleanup the tools and logfiles used in this thread.
Rename the file FRST64.exe to uninstall.exe and run it. This will remove all files and folders created by FRST and the tool itself.
Reboot the machine to complete.
You may remove the tool SFCFix.exe and its log files.

Take care.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top