TOLD TO JUMP OVER HERE from BSOD forum

Most recent DISM and scannows (same as in post #29 in BSOD thread)
Lenova indicated all drivers are up to date.
I am currently running Lenova Y510P diagnostics (I've lost SC Card drive and one USB port.... will try rebooting when Lenova scan finished)

Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.

C:\windows\system32>dism /online /cleanup-image /scanhealth

Deployment Image Servicing and Management tool
Version: 6.3.9600.19408

Image Version: 6.3.9600.19397

[==========================100.0%==========================]
The component store is repairable.
The operation completed successfully.

C:\windows\system32>dism /online /cleanup-image /restorehealth

Deployment Image Servicing and Management tool
Version: 6.3.9600.19408

Image Version: 6.3.9600.19397

[==========================100.0%==========================]

Error: 0x800f0906

The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required t
o restore the feature. For more information on specifying a source location, see
Configure a Windows Repair Source.

The DISM log file can be found at C:\windows\Logs\DISM\dism.log

C:\windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
 
SD CARD no longer reading because:
 

Attachments

  • Card REader Diagnostic 2.JPG
    Card REader Diagnostic 2.JPG
    85.6 KB · Views: 2
  • Card REader Diagnostic.JPG
    Card REader Diagnostic.JPG
    71.6 KB · Views: 2
So the SD card reader is a Genesis, which has worked fine for 5 years? now. Tryinig to update the driver, I encounter this error


1603681854673.png
 
OK, so the cab file for the Genesys card reader was downloaded from Microsoft site, but where does the cab file go? or what file within it do I select as the driver.... sorry, I try to update the driver and scroll to the cab file......
it downloaded to user/me/appdata/temp..... and I also copied it to C:\windows\System32\drivers\Genesis Card Reader.... but it doesn't install. Help!
 
Ok, now I have no idea what I did.... I ran Lenova Service Bridge, and a few other things, and this morning when I booted up, I noted the card reader was reading again.... so I went in and looked at the driver... and now there's a different list of drivers appearing, with the "disk.sys" the one in use (that did not appear in the previous list of available drivers) I also noticed my start-up services were a bit different (partly for running Windows Defender), but all the programs I had previously disabled were enabled again... I did partially run the DriverPack Solutions.... but did not complete it. Maybe that did it? Anyway, I now hve my card reader and USB port back. Somehow Opera was installed (I use to have it, but removed it a few months ago)





1603749945724.png
 
Now the remaining issue seems to be this error message on start-up:
 

Attachments

  • launch problem.JPG
    launch problem.JPG
    45.6 KB · Views: 4
OK, I uninstalled it from Programs. I no longer have BSOD, I have my SC card reader and USB port showing up again. But windows is running really slow.
 
I'm going to run Windows Defender overnight. Then check back tomorrow and see if you have any suggestions what I should try next.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top