tiworker.exe always startup and dism.exe unable to download source files

T

TRex

New member
Joined
Feb 19, 2015
Posts
4
Hi,
First i apologize for any english mistake since i'm not fully flent in english.
Something bother me as since i swap to Win 8.1 and even more recently ending up with bad performance in game.
Since 3 more day especially have worst performance, don't know why.
So i start looking into my computer, software-wise, to check if something went wrong.
I have to say before that i tweaked my windows, especially since 8.1 upgrade, to disable some useless services (using services.msc)and the windows App (store and like) that kept bothering me cause they always run on the background (using group policies management).
I noticed that my Avast automatically shutdown (cannot perform scan then) after a while.
So i ending up uninstalling avast and reinstall it now it is ok for avast, but that made me suspect a virus or malware. Not 100% sure it is/was that.
But I did search for online scanning, ending up using eset online scan (took me 10 hours) he found 6 file that i know of, so i think low threat, but either i removed them to be sure.
After that i rescan with the new installed working avast, he found 0 threat. Used malawarebyte, found 1 file that again i knew of so dont think it was the issue, but delete it either.

From now either i have a nasty hard to remove virus or so or the issue is else where in my Windows configuration.

So i back up to something that i noticed months ago but put it aside by the time is that at each startup tiworker seems run and seems to fails do to something since it goes again and again he time i start my PC. I even falling into habit of manually kill the process each startup ....

So now i go back to this and seek out on web that it may be relate to an windows update failure, and i have to run DISM.exe /Online /Cleanup-Image /Restorehealth

So i tried that and ending up with the "famous"
Error: 0x800f0906

The source files could not be downloaded.
Click to expand...

So i found several thread on this issue read them all. Tried all kind of solution I encountered :
delete the Windows/Software-Distribution/Download files : no change.
http://www.thewindowsclub.com/repair-corrupt-windows-image-error-0x800f0906 : no change.
trying this
Code: 
Dism.exe /online /Cleanup-Image /StartComponentCleanup
sfc /scannow
Dism /Online /Cleanup-Image /RestoreHealth
sfc /scannow
: no change.
Go in Group policies to "specify setting for optional component installation and component repair" and check "contact Windows Upade directly ..." : no change.

So the sfc/scanow found no corrupt file in output message.

The
Code: 
Dism /Online /Cleanup-Image /RestoreHealth
give me that instead in cbs.log file :
2015-02-19 18:11:45, Info CBS Mapping: Find package: Package_for_KB2959977_RTM~31bf3856ad364e35~x86~~6.3.1.1 in a existing category/updateID: 6407468e-edc7-4ecd-8c32-521f64cee65e/4ca4dbaa-fae4-4a7c-9760-8e202d10128f, replacing it with new category/updateID: 92c11451-db0c-435c-a5ad-f6fe05f3da6e/dafca2c4-a05a-4bb1-a006-2e22d8367a6d
2015-02-19 18:11:45, Info CBS Invalid array index [HRESULT = 0x80070057 - E_INVALIDARG]
2015-02-19 18:11:45, Info CBS Mapping: Find package: Package_for_KB2959977~31bf3856ad364e35~x86~~6.3.1.1 in a existing category/updateID: 6407468e-edc7-4ecd-8c32-521f64cee65e/4ca4dbaa-fae4-4a7c-9760-8e202d10128f, replacing it with new category/updateID: 92c11451-db0c-435c-a5ad-f6fe05f3da6e/dafca2c4-a05a-4bb1-a006-2e22d8367a6d
2015-02-19 18:11:45, Info CBS Invalid array index [HRESULT = 0x80070057 - E_INVALIDARG]
2015-02-19 18:11:50, Info CBS Not able to find package: Package_16_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 from the cached windows update index. [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS The mapping index cache was refreshed recently, skip.
2015-02-19 18:11:50, Info CBS Failed to find package: Package_16_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 from the index with mapping index packages recently rebuilt, [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to get WU category/updateID for package: Package_16_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to get the mapping of package: Package_16_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2, continue. [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Not able to find package: Package_9_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 from the cached windows update index. [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS This session already attempted mapping cache rebuild, skip.
2015-02-19 18:11:50, Info CBS Failed to find package: Package_9_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 from the index with mapping index packages recently rebuilt, [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to get WU category/updateID for package: Package_9_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2 [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to get the mapping of package: Package_9_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2, continue. [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to find [HRESULT = 0x800f090d - CBS_E_MISSING_PACKAGE_MAPPING_INDEX]
2015-02-19 18:11:50, Info CBS Failed to collect payload and there is nothing to repair. [HRESULT = 0x800f0906 - CBS_E_DOWNLOAD_FAILURE]
2015-02-19 18:11:50, Info CBS Failed to repair store. [HRESULT = 0x800f0906 - CBS_E_DOWNLOAD_FAILURE]
2015-02-19 18:11:50, Info CBS Ensure CBS corruption flag is clear
2015-02-19 18:11:50, Info CBS
=================================
Checking System Update Readiness.

(p) CSI Payload Corrupt msil_system.runtime.remoting_b77a5c561934e089_6.3.9600.20545_none_c9cfe75f22e91e63\System.Runtime.Remoting.dll
Repair failed: Missing replacement payload.
(p) CSI Payload Corrupt msil_system.runtime.remoting.resources_b77a5c561934e089_6.3.9600.20545_fr-fr_a8607bcf789b10a3\System.Runtime.Remoting.Resources.dll
Repair failed: Missing replacement payload.

Summary:
Operation: Detect and Repair
Operation result: 0x800f0906
Last Successful Step: Entire operation completes.
Total Detected Corruption: 2
CBS Manifest Corruption: 0
CBS Metadata Corruption: 0
CSI Manifest Corruption: 0
CSI Metadata Corruption: 0
CSI Payload Corruption: 2
Total Repaired Corruption: 0
CBS Manifest Repaired: 0
CSI Manifest Repaired: 0
CSI Payload Repaired: 0
CSI Store Metadata refreshed: True

Total Operation Time: 1329 seconds.
Click to expand...
So I looked for this KB identifier : KB2931358 and that ending up to be a securiy update for .Net Framework 3.5.
So i try to remove it to reinstall it but this KBKB2931358 cannot be unisntalled (tried both with remove programs and feature and command line interpreter with wusa.exe tool). So I did try to remove .Net Framework 3.5 using remove Programs and feature : .Net Framework 3.5 was unchecked so i assume it "remove" it, but the KBKB2931358 was still here, and same issue again with
Code: 
Dism /Online /Cleanup-Image /RestoreHealth
. Tried again after reinstall (or re enable i dont know what is approriate) .Net framework 3.5 via remove Programs and Features. Again the Error: 0x800f0906 ...

So right now I was looking on .Net Framework Cleanup tools, ending me trying before .Net Framework Repair tools : again stuck on Error: 0x800f0906 after DISM.exe ...

I tried your SFCFix.exe, he found nothing even ending up with the same Error: 0x800f0906.

So before i try remove all .Net feature (and i dont know if it wise) I prefer asking you here before is that this Error: 0x800f0906 issue matter after all (if so how to resolve it), or my PC performance issue is from something else ?

Thanks for any help.

P.S. : I add all the log file i discused here under Trex log case.zip : Trex log case.zip
 
Hello and welcome to the forom :)

Thanks for providing such a detailed explanation of everything so far, it has really helped.

We will start of with repairing these files and go from there:
Code: 
(p)	CSI Payload Corrupt			msil_system.runtime.remoting_b77a5c561934e089_6.3.9600.20545_none_c9cfe75f22e91e63\System.Runtime.Remoting.dll
(p)	CSI Payload Corrupt			msil_system.runtime.remoting.resources_b77a5c561934e089_6.3.9600.20545_fr-fr_a8607bcf789b10a3\System.Runtime.Remoting.Resources.dll

SFCFix script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Go to your desktop and right click on the background -> Select New -> Text Document -> Name this file SFCFixScript.txt.
  3. Open up SFCFixScript.txt and copy all of the following text inside the code box below and paste it into SFCFixScript.txt.
    Code: 
    Trace::
msil_system.runtime.remoting_b77a5c561934e089_6.3.9600.20545_none_c9cfe75f22e91e63
msil_system.runtime.remoting.resources_b77a5c561934e089_6.3.9600.20545_fr-fr_a8607bcf789b10a3
  4. Click on File -> Save. Close out of SFCFixScript.txt.
  5. Save any open documents and close all open windows.
  6. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  7. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  8. SFCFix will now process the script.
  9. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  10. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.
 
Hi,
first thank you for considering my case.
Here is the result of the trace :
Code: 
SFCFix version 2.4.3.0 by niemiro.
Start time: 2015-02-22 11:18:14.523
Microsoft Windows 8.1 Update 3 - x86
Using .txt script file at C:\Users\Aurelien\Desktop\SFCFixScript.txt [0]




Trace::
Successfully traced component msil_system.runtime.remoting_b77a5c561934e089_6.3.9600.20545_none_c9cfe75f22e91e63.
    Package_16_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2.2931358-31_neutral_LDR2

Successfully traced component msil_system.runtime.remoting.resources_b77a5c561934e089_6.3.9600.20545_fr-fr_a8607bcf789b10a3.
    Package_9_for_KB2931358~31bf3856ad364e35~x86~~6.3.1.2.2931358-17_neutral_LDR2
Trace:: directive completed successfully.




Successfully processed all directives.
SFCFix version 2.4.3.0 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2015-02-22 11:18:15.805
Script hash: fBQqW5DxxMuxYsoh4K3ydle648a00YVWc7/jud3n2N8=
----------------------EOF-----------------------
 
Hello again,

No worries at all :) I am currently trying to source these files for you now, but I am not having a huge deal of luck.

Can you please to folder C:\Windows\WinSxS\Maanifests, you should have the two files inside this folder:
msil_system.runtime.remoting_b77a5c561934e089_6.3.9600.20545_none_c9cfe75f22e91e63.manifest
msil_system.runtime.remoting.resources_b77a5c561934e089_6.3.9600.20545_fr-fr_a8607bcf789b10a3.manifest

Please copy both these files to your desktop -> add them into a zip file -> attach to your next post.

Thanks
Alex
 
Hi,
I just up the topic if it may had been forget somehow.
If not, no worry, I'll wait.
 
No sorry :(

I have asked a few people and no one has these files.

Sorry to say but you are looking at a repair install here.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top