Thank you for your answers.
My old SSD was plugged and formatted in my notebook. I can't test in that direction.
I tried several things:
- Boot in safe mode with network -> 4 smooth boots, 2 faulty boots
- Boot in safe mode without network -> 5 smooth boots so far!
- Boot normally -> 1 faulty boot immediately, disabled network adapter, next boot was faulty too
I looked in my system event log and noticed the following:
- When the boot is flawed, the system event log showed two warnings everytime -> amd_sata event id 129 "Reset to device, \Device\RaidPort0, was issued."
- When the boot is fine, none of these event ids show up
The etl-tracefile is sized about 1,6gb. Should I upload this one?
I can only provide you with a screenshot in german, but I think you figure out what it means.
Or should I create a new file with your preferred settings? I can reproduce the problem at all times.
(boot, verbose, file)
Is it possible, that the new drive can't work correctly with the ADM Sata driver?
But why only sometimes when booting. The rest of the system works fine.