[SPLIT2] CNBJ2530.DPB and prncacla.inf Corruptions - Windows 8/8.1

[newb]

I have still the problem - the Win 8.1 Update 1, grace to SCFix.exe+SCFix.zip, DISM.exe, and countless repetitions - does not complete during the reboot. The great success though is that the KB2919355 completes install - but fails during reboot.
I started with SCF.exe /scannow and got errors that SCF could not fix. Than SCFix.exe reported one error in the CNBJ2530.dpb and fixed it. Tried to instal KB2919355 - failed on reboot - previously it was failing before it got to reboot.
Of course I installed KB2919442 and run clearcompressionflag.exe in that order - but still no completion of KB2919355.

I rerun again the SCFix.exe which reported this time 5 errors and reported correcting 1 of them with the CNBJ2530.dpb fix for 6.3.9600.16384. But scanning with SCF.exe /scannow reports no errors.

Enclosed are CBS.log, dism.log, SCFix.txt

Help please:huh:

 

[tom982]

Hello newb, welcome to Sysnative!

SFCFix looks through every CBS log and counts the errors, which is why it's showing an error is still remaining even though the problem has been fixed.

chkdsk /f

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Click on the Start
   
   button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following commands into it, press enter after each
   
   chkdsk /R
   
   
4. Reboot
5. Download ListChkdskResult.exe (by SleepyDude) from the link below:
   
   https://dl.dropboxusercontent.com/u/12354842/My Tools/ListChkdskResult.exe
6. Double click on it to run it. It will take a few seconds to scan, then it will open a Notepad window with the log. Copy and paste the contents of this into your next post please!

DISM /RestoreHealth Scan

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Right-click on the Start
   
   button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
   
   Dism /Online /Cleanup-Image /RestoreHealth
   
   
3. When DISM finishes scanning your component store, zip up and attach your CBS log to your next post:
   
   C:\Windows\Logs\CBS\CBS.log

Tom