SFCFix Needed - Error 800B0100

[ajz1982]

Getting a 800B0100 on update KB3067903. I have attached the CheckSUR log file. Can someone help me out?

SFCFix version 3.0.0.0 by niemiro.
Start time: 2016-07-29 10:42:46.862
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.








AutoAnalysis::
SFC verification failure on file Utilman.exe of component Microsoft-Windows-UtilMan (amd64, version 6.1.7600.16385). Permissions may be damaged - attempting automatic repair.
Successfully repaired permissions and ownership on file C:\Windows\winsxs\amd64_microsoft-windows-utilman_31bf3856ad364e35_6.1.7600.16385_none_5e9ea1964aee5579\Utilman.exe and all associated hardlinks.






SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 36
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.








Successfully processed all directives.
SFCFix version 3.0.0.0 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2016-07-29 11:39:11.432
----------------------EOF-----------------------

 

[BrianDrab]

Hello and welcome

Due to the precise nature of your corruption, you will receive help from a user named PeterJ. He's one of our senior trainees here who's in his final phrase of his studies and needs to gain some real world experience in specific areas of Windows Update. This means that he'll be assisting you, but that I will first need to double check and approve his fixes before he posts them to you. If anything this is a good thing for you because it means that you've got at least two of us watching over your thread, but it will unfortunately add a slight delay between each reply. I hope that you understand and can accept the need for us to train up new members in this way in order to carry on doing what we do here, however, if for any reason you object to this setup, I will happily take on your thread myself.

Thank you very much for your understanding. We'll be with you very shortly.

 

[PeterJ]

Hello en welcome,

Follow the instructions below to fix the errors reported by the System Update Readiness Tool (SURT);

System Update Readiness Tool (SURT) - Fix

WARNING! The following fix is specific to the user's system in this thread. No one else should follow the instructions below to apply that fix, as it could damage your system. If you need assistance with an issue, please start a new thread and someone will assist you shortly.

• Download the attached archive file, Packs.zip and save it on your Desktop;
• Once it's downloaded, right-click on it and select Extract All...;
• Check the Show extracted files when complete checkbox, and click on Extract;
• On completion, a folder will open with two folders inside it, Manifests and Packages;
  • Copy and paste the files of the Manifests folder inside C:\Windows\Temp\CheckSur\winsxs\Manifests
  • Copy and paste the files of the Packages folder inside C:\Windows\Temp\CheckSur\servicing\Packages
• Run the System Update Readiness Tool (SURT) again;
• On completion, attach the log located at C:\Windows\Logs\CBS\CheckSUR.log in your next reply;