sfcfix.exe but still corrupted, help!

[Rolliopan]

Hi, I am not sure how to completely fix all the corrupted files after having used sfc /scannow, DISM, SFCFix.exe.

I have uploaded the files here, CBS log and CBS persist log, and attached the logs from what I have tried.

Please take a look and see how else I can clean up those corrupted files please. Thanks!

 

[Sysnative Windows Update]

Hello and welcome!

Step#1 - DISM /RestoreHealth Scan
Warning:this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Right-click on the Start button and select Command Prompt (Admin)
2. When command prompt opens, Copy (Ctrl+C) and Paste (Right-click > Paste) the following command into it, then press Enter
   Dism /Online /Cleanup-Image /RestoreHealth
3. Once it finishes, copy and paste the following into the command-prompt window and press Enter. If prompted to overwrite the existing file go ahead.
   copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
   
4. Once this has completed please go to your Desktop and you will find CBS.txt => Please zip/upload to this thread.
   Please Note:: if the file is too big (over 7MB) to upload to your next post, please upload via a service and just provide the link.

 

[Rolliopan]

Hi,

ok have followed your steps, see this link for the log.

 

[Sysnative Windows Update]

Hi, please provide your whole CBS folder.

 

[Rolliopan]

Dropbox - New folder - Simplify your life

Hi, here is the whole folder. Thanks for your help.

 

[Sysnative Windows Update]

What message did you receive from DSM after it has completed?

 

[Rolliopan]

The DISM was not successful and halfway my network was disconnected and below is the error from the DISM.


Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.


C:\Windows\system32>dism /online /cleanup-image /restorehealth


Deployment Image Servicing and Management tool
Version: 6.2.9200.16384


Image Version: 6.2.9200.16384


[==========================100.0%==========================]


Error: 0x80240021


DISM failed. No operation was performed.
For more information, review the log file.


The DISM log file can be found at C:\Windows\Logs\DISM\dism.log


C:\Windows\system32>

 

[Sysnative Windows Update]

Attach CBS.log and DISM.log.

Afterwards, run SFC Scan and attach CBS.log if any corruptions are detected.