sfc /scannow issues

danieluk9 · Oct 4, 2013

had some issues with a scannow following a screw up with magicdisk, with high specs I can normally expect a boot time of about 14 seconds, but since having to restore after this it takes about 2 minutes. I read that removing magicdisk can cause problems so i ran a scan, here's the zip.

Full cmd log: "

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

C:\Windows\system32>

"
The scan took about 3 1/2 minutes, Windows is installed on an SSD, if that helps at all
Thanks in advance for the help.
Going to restore my laptop again since I tried magicdisk, and again, it failed.
The file is 7.32mb dispite ultra compression from 7z, the forum only allow 7.15mb so here's a direct dropbox link :) https://www.dropbox.com/s/gzjstlg3n24b9le/CBS.zip

tom982 · Oct 5, 2013

Hello Daniel, welcome to Sysnative!

Can you download and install the System Update Readiness Tool please?

Download System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2013] from Official Microsoft Download Centre

Post the log when finished:

C:\Windows\Logs\CBS\CBS.log

Tom

danieluk9 · Oct 5, 2013

Thank you for a fast and helpful reply.
It successfully installed "Hotfix for Windows (KB947821)" Here's the log.
https://www.dropbox.com/s/11658vizxx7a8dh/CBS.log

tom982 · Oct 5, 2013

Thanks, that's great. Now can you post your CheckSUR log:

C:\Windows\Logs\CBS\CheckSUR.persist.log

Tom

danieluk9 · Oct 5, 2013

https://www.dropbox.com/s/n3f5j2ju0ommiok/CheckSUR.persist.log
Thanks

tom982 · Oct 5, 2013

Hi Daniel,

The SURT performed a few fixes, but none of which were the ones I was hoping for!

SFC Scan

Click on the Start

button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Tom

danieluk9 · Oct 5, 2013

So what happens now?
https://www.dropbox.com/s/6n85llalsjnspzg/CBS.log

tom982 · Oct 6, 2013

Hi Daniel,

Time will tell! It shouldn't be anything to worry about though, it just makes things harder for us.

Are you trying to uninstall IE10, or have you uninstalled IE10 at some point? Several of the files mentioned in your CBS log are trying to be rolled back from 10.2.9200.16686 to 9.4.8112.16421.

Tom

danieluk9 · Oct 6, 2013

Nope, the computer is like 4 days old and the first problems occured when restoring from installing magicdisk, and i tried to put it in hibernate last night and after 2 hours the battery died, maybe some of the damaged windows files is causing this?
The laptop starts up in about 14 seconds again, as normal, but on some boots it won't play the animation for 30 seconds and no hdd activity, the second the hdd is active it boots straight away...

tom982 · Oct 6, 2013

Hi Daniel,

Thanks for the further information! I would like you to uninstall IE10 whilst we troubleshoot this please:

How to Remove IE10 and Get Back to IE9 on Windows 7

Then reboot and run another SFC scan and post your CBS log when complete :)

Tom

danieluk9 · Oct 6, 2013

Uninstalled, here's the new log
https://www.dropbox.com/s/6n85llalsjnspzg/CBS.log
woah, 35MiB

tom982 · Oct 6, 2013

Hi Daniel,

Great! Looks much better! As far as I can tell, SFC has repaired all but one of the files:

Code:

2013-10-06 23:11:29, Info                  CSI    00000511 [SR] Cannot repair member file [l:24{12}]"vwififlt.sys" of Microsoft-Windows-VWiFi, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file cannot be checked

But there's only one way to check, another scan!

SFC Scan

Click on the Start

button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

sfc /scannow

Wait for this to finish before you continue

copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt
This will create a file, cbs.txt on your Desktop. Please attach this to your next post.

Tom

danieluk9 · Oct 6, 2013

any resolution to the derped shutdowns? the boots where it will just hang for a minute, the time it refused to go into hibernate?
the new https://www.dropbox.com/s/6n85llalsjnspzg/CBS.log

tom982 · Oct 6, 2013

Hi Daniel,

We're down to one problem now:

Code:

2013-10-07 00:10:21, Info                  CSI    000002f3 [SR] Repairing 1 components
2013-10-07 00:10:21, Info                  CSI    000002f4 [SR] Beginning Verify and Repair transaction
2013-10-07 00:10:21, Info                  CSI    000002f5 [SR] Cannot repair member file [l:24{12}]"vwififlt.sys" of Microsoft-Windows-VWiFi, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file cannot be checked
2013-10-07 00:10:21, Info                  CSI    000002f6 [SR] Cannot repair member file [l:24{12}]"vwififlt.sys" of Microsoft-Windows-VWiFi, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file cannot be checked
2013-10-07 00:10:21, Info                  CSI    000002f7 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"

I've got a lovely 9am differential equations lecture so I've got to head off now, but I'll get back to you with a fix for this and your shutdown issue tomorrow (well, technically it's today now).

Tom

danieluk9 · Oct 8, 2013

What now?

tom982 · Oct 12, 2013

Hi Daniel,

Sorry for the delay!

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

Download SFCFix.exe (by niemiro) and save this to your Desktop.
Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
Save any open documents and close all open windows.
On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
SFCFix will now process the script.
Upon completion, a file should be created on your Desktop: SFCFix.txt.
Copy (Ctrl + C) and Paste (Ctrl + V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

https://dl.dropboxusercontent.com/u/16537616/Fixes/SFCFix/Scripts/danieluk9/SFCFix.zip

Tom

danieluk9 · Oct 12, 2013

done that,

Code:

SFCFix version 1.5.7.0 by niemiro.
Start time: 2013-10-12 14:29:33.186
Using .zip script file at C:\Users\Daniel\Desktop\SFCFix.zip








PowerCopy::
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifibus.sys
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwififlt.sys
Successfully took permissions for file or folder C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifimp.sys


Successfully copied file \\?\C:\Users\Daniel\AppData\Local\niemiro\Archive\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifibus.sys to \\?\C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifibus.sys.
Successfully copied file \\?\C:\Users\Daniel\AppData\Local\niemiro\Archive\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwififlt.sys to \\?\C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwififlt.sys.
Successfully copied file \\?\C:\Users\Daniel\AppData\Local\niemiro\Archive\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifimp.sys to \\?\C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifimp.sys.


Successfully restored ownership for C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifibus.sys
Successfully restored permissions on C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifibus.sys
Successfully restored ownership for C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwififlt.sys
Successfully restored permissions on C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwififlt.sys
Successfully restored ownership for C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifimp.sys
Successfully restored permissions on C:\Windows\winsxs\amd64_microsoft-windows-vwifi_31bf3856ad364e35_6.1.7600.16385_none_bb899fc9dd3605e0\vwifimp.sys
PowerCopy:: directive completed successfully.








RegistryScript::
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages.
Successfully took ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages.


Successfully imported registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_2_for_KB2633171~31bf3856ad364e35~x86~~6.0.1.0
Successfully imported registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_2_for_KB2644615~31bf3856ad364e35~x86~~6.0.1.0


Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_2_for_KB2633171~31bf3856ad364e35~x86~~6.0.1.0.
Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages.
Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_2_for_KB2644615~31bf3856ad364e35~x86~~6.0.1.0.
Successfully restored ownership and permissions for registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages.
RegistryScript:: directive completed successfully.








Successfully processed all directives.
SFCFix version 1.5.7.0 by niemiro has completed.
Currently storing 6 datablocks.
Finish time: 2013-10-12 14:29:33.966
----------------------EOF-----------------------

I also took the liberty of doing another sfc /scannow,
" https://www.dropbox.com/s/6n85llalsjnspzg/CBS.log "
and i'll try to go into hibernate, I'll let you know

danieluk9 · Oct 12, 2013

Hibernating still fails
Something intresting;
the laptop has a gtx 680 3gb, which enables and disables when it's needed, and when it turns on a light comes on, etc.
A game called Haunted Memories doesn't support it switching from the intergrated HD graphics (which it uses when there's no load to save battery) to the gpu, it crashes, if I go directly to hauntedmemories.exe and right click it, i can choose what graphics to launch it with, if i force it to stay on either, it's fine.
Same with a software called Unity.
ANYWAYS; When entering hibernate, i see my gpu light go on, and the fans switch on too, and then I have a black screen and the hdd light is flat out, for upto 2 hours (longest I've waited) but I can't hear any HDD activity, maybe the hibernate issues are something todo with this?
Also I can't say for sure, but on the boot after having to hard shutdown on the hibernate, windows said it was doing an update, speaking of boots, I've not had any major hangs on boots, apart from the update operation one, but that is only 10 seconds and it happens to my freind, whenever an update is being installed before windows boots.
If you know a way of preventing hibernate from switching graphics; I think that might help, but I'm a novice

tom982 · Oct 12, 2013

Hi Daniel,

Hardware isn't a forte of mine but I've managed to fix all of your SFC problems, so we know that isn't the cause of the problem. I suggest you start a thread over in the Windows 7 forum and someone will help you with your hibernation problem.

Windows 7 | Windows Vista - Sysnative Forums

Tom

sfc /scannow issues

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Emeritus

Member

Member

Emeritus