SFC says "Windows Resource Protection could not perform the requested operation"

G

garegin

Well-known member
Joined
Jul 22, 2015
Posts
117
Hi after running dism repair, it says that windows repaired the errors.
but after running sfc I get this error
Windows Resource Protection could not perform the requested operation'
the cbs.log is attached here.

CBS2.txt
 
Last edited:
Hi!

I don't see any errors.

Please do it again:

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 
SFC does not seem to report errors, please run a scan with FRST:

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
no. I have been trying to install a webcam and a headset and it hasn't been going through. The Windows install is a few years old
 
I downloaded W10 from Microsoft, but it failed. I ran it from within Windows. Not surprising. Usually, they fail when Windows itself is corrupted. How can we fix Windows 8.1?
 
Upload Drivers Hive[/B]

  1. Navigate to C:\Windows\System32\config
  2. Right-click on the current DRIVERS file and select copy
    Note: If you get an error that the file is in use, reboot your computer and then try again.
  3. Right-click on your Desktop and select paste
  4. Right-click on the DRIVERS file on your Desktop and select Send To -> Compressed (zipped) Folder
  5. Upload the zip from your Desktop to a file sharing service such as Dropbox or OneDrive or SendSpace and include the link with your reply.
 
Note that I had deleted and Windows automatically recreated the drivers hive. that's why it's so small
 

Attachments

Step 1 - Replace Drivers Hive Manually

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download DRIVERS.ZIP and save to your desktop.
  2. Right-click on it and select Extract all.... Make sure the "Show extracted files when complete" is checked and click Extract.
  3. Now we have the DRIVERS file that we will be using to replace your current one.
  4. Navigate to C:\Windows\System32\config
  5. Right-click on the current DRIVERS file and select rename. Rename it to DRIVERS.bad.
    Note: If you get an error that the file is in use, reboot your computer and then try again.
  6. Take the file from the Drivers folder on your desktop and paste it into C:\Windows\System32\config

Afterwards, retry Windows 10 upgrade.
 

Attachments

You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top