SFC Fix Unsuccessful repair of corrupt windows File

[dpesaturo]

Hi:
My control panel would not load so I have run sfc and sfcfix but have been unsuccessful in repairing a corrupt windows file. I copied the file from another windows 8.1 device and tried to re-register it but no luck. Below is the detail from my sfcfix detail log. The control panel will open in safe mode. Any help would be appreciated!

AutoAnalysis::
FIXED: Performed DISM repair on file Amd64\CNBJ2530.DPB of version 6.3.9600.17415.


CORRUPT: C:\windows\winsxs\amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_11.0.9600.17631_none_16e349b1053a946d\mshtml.dll
CORRUPT: C:\windows\winsxs\wow64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_11.0.9600.17631_none_2137f403399b5668\mshtml.dll




SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 2
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 1
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.

 

[Go The Power]

Hello and welcome to the forum!

SFCFix script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
2. Go to your desktop and right click on the background -> Select New -> Text Document -> Name this file SFCFixScript.txt.
3. Open up SFCFixScript.txt and copy all of the following text inside the code box below and paste it into SFCFixScript.txt.
   

   Trace::
   amd64_microsoft-windows-ie-htmlrendering_31bf3856ad364e35_11.0.9600.17631_none_16e349b1053a946d

4. Click on File -> Save. Close out of SFCFixScript.txt.
5. Save any open documents and close all open windows.
6. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
7. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
8. SFCFix will now process the script.
9. Upon completion, a file should be created on your Desktop: SFCFix.txt.
10. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.