sfc & dism problem

anasoth · Jun 19, 2022

Hi,
last week i had a problem with my hdd so i repalce it after cloning "sector by sector"
I do that because I work remote to the target pc
after I boot up my second HDD drive access denied ... i try to replace ownership but after I restart it return to access denied so I tried to do dism & sfc
dism and sfc failed to repair so I use sfcfix

attached you can find the logs

thanks for helping in advance

PeterJ · Jun 20, 2022

Hello and welcome,

You created 2 threads for the same problem. I have therefor closed the other thread.
Follow the instructions below please.

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

Download the attachment SFCFix.zip and save it on your desktop.
Save any work you have open, and close all programs.
Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
SFCFix will launch, let it complete.
Once done, a file will appear on your desktop, called SFCFix.txt.
Attach that file to your next reply.

anasoth · Jun 20, 2022

thanks for your kindly respond

PeterJ · Jun 20, 2022

The log looks good.
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails attach the file cbs.log to your next reply.

anasoth · Jun 20, 2022

sfc /scannow result: windows resource protection did not found integrity violations

many thanks

anasoth · Jun 21, 2022

but dism still not working please find the attached,

also I have another problem, the second internal HDD access denied "location not found" after I restart my PC , its work only when I change drive letter also after restart give me access denied , when I tried to replace ownership it stuck on replace ownership with no move.

thanks in advance

PeterJ · Jun 21, 2022

Attach the file C:\Windows\logs\CBS\cbs.log also.

anasoth · Jun 21, 2022

please find the attached
thanks

PeterJ · Jun 21, 2022

Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

Please download the Freeware RegBak from here: Acelogix Software - Download products
You will find it at the bottom of the page that the link brings you to.
Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
Click the New Backup button. Accept the defaults and simply click Start.
When it says Finished successfully, click the Close button.
This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
You can close any open windows you have as well as the RegBak program now.

anasoth · Jun 21, 2022

Gofile - Free file sharing and storage platform

thanks

PeterJ · Jun 21, 2022

Remove Update Manually

Click on the Start button and in the search box, type Command Prompt.
When you see Command Prompt on the list, right-click on it and select Run as administrator.
When command prompt opens, copy and paste the following command into it, then press enter.
wusa /uninstall /KB:2898108
Let me know if it says it was successful or if there are any errors.

anasoth · Jun 21, 2022

update for Microsoft windows (kb2898108) is required by your computer and cannot be uninstalled

PeterJ · Jun 21, 2022

Please do following:

WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

Download the attachment SFCFixScript.txt and save it on your desktop.
Save any work you have open, and close all programs.
Drag the SFCFixScript.txt file over the SFCFix.exe executable and release it.
SFCFix will launch, let it complete.
Once done, a file will appear on your desktop, called SFCFix.txt.
Attach that file to your next reply.

anasoth · Jun 21, 2022

please find the attached

PeterJ · Jun 22, 2022

FRST Registry Search

Click the Start button and choose Control Panel.
In the upper right corner ensure the View by: is set to Category.
Select the Programs group.
Click the Turn Windows features on or off link. This will bring up the Windows Features dialog.
Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.
Download the Farbar Recovery Scan Tool and save it to your Desktop:
64-bit: Downloading Farbar Recovery Scan Tool
Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
Right-click on the file FRST64.exe and choose Run as administrator.
Copy and paste KB2898108 into the Search box and click the Search Registry button.
When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
You may close any remaining open windows now.

anasoth · Jun 22, 2022

please find attached

PeterJ · Jun 22, 2022

Please attach the file D:\GDR_Packages\Windows8.1-KB2898108-x64.cab if still available.

anasoth · Jun 22, 2022

not available and i don't remember that this file and folder existed in drive d

PeterJ · Jun 22, 2022

Step 1:
Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.

Download the attachment fixlist.txt and save it to your desktop.
Right-click on FRST.exe and select "Run as administrator".
Press the Fix button.
The tool will now process fixlist.txt.
If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
Attach the logfile Fixlog.txt to your next reply.

Step 2:
Run the command sfc /scannow in an elevated commandprompt and report the result.
If it fails attach the file cbs.log to your next reply.

anasoth · Jun 22, 2022

please find attached,
sfc result: windows resource protection did not found integrity violations

a lot of thanks

sfc & dism problem

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Attachments

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Member

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Member

Moderator, Windows Update Expert, Security Analyst

Member

Moderator, Windows Update Expert, Security Analyst

Attachments

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Member

Attachments

Moderator, Windows Update Expert, Security Analyst

Member

Moderator, Windows Update Expert, Security Analyst

Attachments

Member

Attachments