SFC and SFCFix Logs (Windows 10 corruptions)

[vblack]

Hello,

I have some issues with my Windows 10 Pro OS. So far, there are few problems I am facing and they are as follows: (For now)

View attachment 22651
1: When I put my PC into sleep mode, every time, the PC auto wakes up at 2:00 am and at 1:00 pm (UK time)



2: Recently I tried to run SFC /Scannow but the scan stops at 62% and gives the following error message:

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 62% complete.


Windows Resource Protection could not perform the requested operation.

I also ran SFCFix and attached both SFC and SFCFix Logs.


3: Since Windows 10 Anniversary Update, I tried many times to update my Windows via ISO (download the correct ISO) about a month ago, I wasn't been able to update the Windows.
The update runs fine up until very last stage and at 91% my PC restarts and then shows Restoring Your Previous Version of Windows.
Then restarts back and boot normally but with no update and there is no error log or anything. After every try, I encounter the same issue.

I left it without update and thinking there might issue with updating through ISO but, yesterday I decided to check for Update in the Windows Settings and noticed I finally received the Anniversary Update and let download and install but then again everything went fine up until the last stage and encountered exact same issue! Of course, I did search about the issue and found some suggestions to try disconnecting HHDs and run the update again.
I did disconnect HHDs and only left my SSDs (in Raid 0) but guess what happened. Yes, that's correct, the exact same issue of 91%! This time, I was seriously like #$@&%*! #$@&%*! #$@&%*! :banghead: :huh::noidea:

Excuse my madness, please.


Could you kind people here help me sort at least these issues for now? I would greatly appreciate it and sorry for my long story.

 

[vblack]

(Updated Post. Please Ignore The Opening Post)

Hello,

I have some issues with my Windows 10 Pro OS. So far, there are few problems I am facing and they are as follows: (For now)


1: When I put my PC into sleep mode/hibernation, every time, the PC auto wakes up at 2:00 am and at 1:00 pm (UK time)


1.1: This is another issue with putting PC in sleep mode/hibernation. whenever I put PC into sleep mode and then I try to login back it works good but after every 4 consecutive sleep modes/hibernations and sometimes only with one sleep mode/hibernation, the PC won't show up the login screen.The monitor screens just goes black and moving keybaord/mouse or doing anything won't help and I am forced to press the restart button or must completely shutdown and boot again in order to be able to use the PC again.

So in summary, the PC is limited only to sometimes 1 time and most of the times 4 consecutive times sleep modes/hibernations and must be restarted or shutdown.


2: Recently I tried to run SFC /Scannow but the scan stops at 62% and gives the following error message:

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 62% complete.


Windows Resource Protection could not perform the requested operation.

I also ran SFCFix and attached both SFC and SFCFix Logs.


3: Since Windows 10 Anniversary Update, I tried many times to update my Windows via ISO (download the correct ISO) about a month ago, I wasn't been able to update the Windows.
The update runs fine up until very last stage and at 91% my PC restarts and then shows Restoring Your Previous Version of Windows.
Then restarts back and boot normally but with no update and there is no error log or anything. After every try, I encounter the same issue.

I left it without update and thinking there might issue with updating through ISO but, yesterday I decided to check for Update in the Windows Settings and noticed I finally received the Anniversary Update and let download and install but then again everything went fine up until the last stage and encountered exact same issue! Of course, I did search about the issue and found some suggestions to try disconnecting HHDs and run the update again.
I did disconnect HHDs and only left my SSDs (in Raid 0) but guess what happened. Yes, that's correct, the exact same issue of 91%! This time, I was seriously like #$@&%*! #$@&%*! #$@&%*! :banghead::huh::noidea:

Excuse my madness, please.


Could you kind people here help me sort at least these issues for now? I would greatly appreciate it and sorry for my long story.

 

[Aura]

Hi vblack,

Do you still need assistance with this issue?